Any Builders/Glaziers on the site?

[berg]

Hi guys, I have a single skin breeze block utility room extension built onto my kitchen.

As it is feckin feezin in the winter and the pipes froze on the washer/dishwasher have just spent a few hundred £ on insulation, silver backed plasterboard and plaster.

The units on the doublde glazed glass have also failed - my question is how much difference will it make to keeping the heat in/cold out if these units for failed? Have been quoted over £600.00 to replace them and not sure whether makes more sense to simply save up enough to have new frames/doors throughout the whole house as the frames are lookin a bit tired anyway. On other hand seems a waste of time to insulate the walls/ceiling if all the heat will still escape through the windows?

Any thoughts?

Cheers.

[PDT]

Need to know Size of the glazed units, distance from floor to glass and the thickness of the glazed units.

[berg]

Need to know Size of the glazed units, distance from floor to glass and the thickness of the glazed units.

Cheers Dave, will have a look, do you offer Stg 2+ glazing per chance? 

[PDT]

Many years ago I used to design glass and timber structures and buildings using 3d cad so I know a little about glass. I have buider friends and friends in the glazing world so will see what I can find out.

[berg]

Many years ago I used to design glass and timber structures and buildings using 3d cad so I know a little about glass. I have buider friends and friends in the glazing world so will see what I can find out.

ta, will take some measurements tomorrow