Make a donation

Author Topic: Simon's Edition30  (Read 5814 times)

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Simon's Edition30
« on: September 14, 2011, 08:28:42 pm »
I've been lurking around the forums for a little while now and I thought it was about time to introduce my wonderfull Edition30. I made Pistonheads my home for six or seven months with the money saved waiting for the right ED30 to come along. It had to be manual , dimond black , five door , on an 08 plate with a full VWSH and a low mileage , clean with no mods. I went to view a few over the months but none were as advertised or with too many miles on the clock. After months of waiting suddenly there it was. Mint condition , 08 plate with 18500 miles on the clock and just about the right price and would you believe - one carefull lady owner :happy2:
Anyway I picked the car up in July and I have to say I love it. It's a fantastic car and a pleasure to drive :driver:

As you can see I have allready added some small mods with more to follow......

I'm no photographer but here are some pics  :wink:





































« Last Edit: October 22, 2011, 04:47:15 pm by maxload »

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Re: My Edition30 :::::
« Reply #1 on: September 14, 2011, 10:04:08 pm »
One of my first mods was to sort out the front and rear badge. The front badge was easy. As you know they can be found on ebay and various other online stores.
The rear badge is a different story though. No one sells them. It was obvious I was gonna have to do it myself....No way was I brave enough to remove the badge straight off the boot handle incase it broke - so I had to remove the boot handle.

First I removed the plastic cover inside the boot.
Then I had to unbolt and move the wiper motor out the way to be able to get to the screws that held the boot handle in place.











Once I had the handle it was a straightforward case of carbon wraping the handle and spraying the badge.




















« Last Edit: September 15, 2011, 03:37:55 pm by maxload »

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Re: My Edition30 :::::
« Reply #2 on: September 14, 2011, 10:20:39 pm »
Last week I had the car remapped. Revo stage1 was my choice. It has turned the car into a beast. She pulls like a train now. The next stage on the slippery slope will be some new springs - it needs lowering. Then a miltek non res and a twintake to help her breath.... :driver:  :happy2:

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Re: My Edition30 ::
« Reply #3 on: September 15, 2011, 01:11:42 pm »
Since owning the car I have become obbsessed with cleaning it. My wife thinks i'm a loon.
Anyway I like to make sure my exhaust is permanantly clean. I use autosol followed be autoglym wheelseal.



Today it's time to get her winter coat on , so a good coating of autoglym HD wax is just the ticket. This was all after a good wash , clay , and a coating of ultra deep shine.







After buffing












Offline baldwined30

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 1
  • -Receive: 6
  • Posts: 525
    • Email
Re: My Edition30 ::
« Reply #4 on: September 15, 2011, 01:34:24 pm »
Nice buddy, you'll have to show me how to get the paint to look like that!!! I think I need to clay mine!!
Ed30

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Re: My Edition30 ::
« Reply #5 on: September 15, 2011, 02:14:40 pm »
Nice buddy, you'll have to show me how to get the paint to look like that!!! I think I need to clay mine!!

You need to spend at least a day or two working on it. This is basicly what I  do.
Here I my weapons of choice.


Day1.
First I will wash it , two bucket method. Then dry it.
Then I clay it all over using a good detailing spray as loob.
Then I wash it again and dry.
Then a cleanser to remove old wax etc
Then I use autoglym ultra deep shine polish which is specialy made for dark cars  :happy2:

Day2.
Wash again and dry.
Then apply HD wax  :happy2:

That kind of covers the basics. Trouble is a black car shows up every single blemish and it can be a pain to keep on top of it. I still have alot to learn . but it's great trying  :grin:

« Last Edit: September 15, 2011, 02:17:40 pm by maxload »

Saint Steve

  • Guest
Re: My Edition30 ::
« Reply #6 on: September 15, 2011, 02:43:20 pm »
If you look outside your house, there's a rather nice Red ed30 for you to keep up the good work on  :wink:

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Re: My Edition30 ::
« Reply #7 on: September 15, 2011, 02:59:09 pm »
If you ever need a hand mate....

Offline Black9

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 35
  • -Receive: 19
  • Posts: 1014
    • Email
Re: My Edition30 ::
« Reply #8 on: September 15, 2011, 04:30:31 pm »
Nice work, car looks immaculate. So to spray the badges u used grey plastic primer (any reason for grey) and VW black Tin spray? How hard/easy a job is it?

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Re: My Edition30 ::
« Reply #9 on: September 15, 2011, 06:46:54 pm »
If your gonna finish with black then use the grey plastic primer as far as I know they don't make a black primer only white , red and silver. Make sure you give the badge a good sanding to help the primer stick better. Give it a light coating of primer , wait 30mins lightly sand it again and give it another spray. Wait for it to dry then apply your top coat. Easy. As for the carbon I ordered an A4 size self addhesive piece off ebay then cut it to size.

Hope this helps - anymore questions just ask  :happy2:

Offline JoeDarKa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 57
  • -Receive: 73
  • Posts: 3188
Re: My Edition30 ::
« Reply #10 on: September 15, 2011, 06:51:58 pm »
Looks a fine example, shiny shiny shiny!  :notworthy:


GT Sport - Reflex Silver 2.0 TDI My Build

Offline ukshaun

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 6
  • Posts: 327
  • If in doubt.. flat out
Re: My Edition30 ::
« Reply #11 on: September 15, 2011, 06:55:23 pm »
great work, is that autoglym hd wax worth using? i was thinking of giving it a go
My progress thread www.mk5golfgti.co.uk/forum/index.php/topic,66117.0.html
Mods done: revo map, new south boost gauge, rcd510 dab, gti grill, gti colour coded valance, tinted lights, leds, gti spoiler

Offline Tfsi_Mike

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 241
  • -Receive: 309
  • Posts: 10222
  • Go Large or Go Home
    • Tfsi Mikes Money Pit AKS / TTE / RTech St2+ Cupra
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,32721.msg402587.html#msg402587
Re: My Edition30 ::
« Reply #12 on: September 15, 2011, 06:56:49 pm »
Very nice, great work on the polish!

1st reasr badge Ive seen in a bit where the 'weave' is stuck on all in the same direction too  :wink:

Lovely Eddy mate  :party:

great work, is that autoglym hd wax worth using? i was thinking of giving it a go

+1

Recently paid a very reasonable price for a detail off Keano with machine polisher but I want to be able to get the same results myself cause I love detailing my car

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Re: My Edition30 ::
« Reply #13 on: September 15, 2011, 07:23:09 pm »
great work, is that autoglym hd wax worth using? i was thinking of giving it a go

I like it , it gives me a finish I like , especialy if you've clayed and polished the car too. I am allways open to other sugestions though as I think experimenting with different products is good. I saw a picture of saintsteves red ED30 earlier and he used dodo supernatural to finish and it looked real glossy and slick , i'll give that a go next.



Recently paid a very reasonable price for a detail off Keano with machine polisher but I want to be able to get the same results myself cause I love detailing my car

I still see alot of swirl marks on my paint so it's not perfect yet. I to would love to get a machine polisher to remove the swirls myself , maybe something I will try soon - I find a very good polish works ok though , I use either super resin polish or ultra deep shine. Both have  fillers to cover minor swirls. However a pro detail sounds good.
« Last Edit: September 15, 2011, 07:30:07 pm by maxload »

Saint Steve

  • Guest
Re: My Edition30 ::
« Reply #14 on: September 15, 2011, 07:36:32 pm »
I used a Machine polisher the other month, and have to say , just with giving it just a quick going over, got rid of 80% of swirls i had with just a few remaining.
Just need to find someone thats willing to Mop the bonnet and front wings to blend back the filled stone chips i have, and get my chin spoiler resprayed by VW.