Make a donation

Author Topic: range control module location nightmare  (Read 1599 times)

Offline daveangel

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 6
  • Posts: 154
    • Email
range control module location nightmare
« on: September 19, 2011, 06:05:09 pm »
hey

trying to retrofit a range control module.  elsa says it should be behind the passenger dash edge pull off panel (opposite to the fuse board)

i have the 75 degree bracket that hold the module but from the elsa pics cant work out what it bolts onto?

anyone pop a pic up of how the module sits in the side the dash, who has factory xenons please???

thanks 

Offline edition_30

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 3
  • Posts: 253
Re: range control module location nightmare
« Reply #1 on: September 19, 2011, 10:18:34 pm »
Does the range control module come with the autolevelers from kufatec?

Offline daveangel

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 6
  • Posts: 154
    • Email
Re: range control module location nightmare
« Reply #2 on: September 20, 2011, 08:49:38 am »
worked it out. the module fits in a clip on the side of the glove box, not in a bracket as shown on etka
  :happy2:

kufatec must be the worst company in the world, forget ebay.

it comes with :-

rear leveller + fixings
front leveller - fixings
control module (second hand)
loom

the loom is too short for a right hand drive car and needs extending for all cecm connections, lights on and power.  I asked kufatec to supply some addition wire and connectors to extend the loom. the reply "extend yourself"

there support is awful, but a wiring diagram is available in a thread here somewhere