Make a donation

Author Topic: RNS510 56plate FSI match  (Read 1353 times)

Offline ripmateyy

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 18
  • Posts: 342
    • Email
RNS510 56plate FSI match
« on: October 08, 2011, 12:00:09 pm »
Do I need to get the Gateway to prevent battery drain for my car with this radio? Also will I have to re program the steering wheel controls MFD and iPod conection to work with the radio?

Sorry for the questions I'm new to all of this!!

Thanks

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: RNS510 56plate FSI match
« Reply #1 on: October 08, 2011, 12:20:01 pm »
on a 56 plate it is likely you'll need a new gateway, and as for reprogramming yes you may need to change a few settings for everything to work.


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline ripmateyy

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 18
  • Posts: 342
    • Email
Re: RNS510 56plate FSI match
« Reply #2 on: October 08, 2011, 12:45:54 pm »
Cheers man! I was just hoping that I didn't have to! Haha even more hassle! I'm still looking at the kenwood volkswagen radio! But then i dont know if it will work with the display on the dash!

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: RNS510 56plate FSI match
« Reply #3 on: October 08, 2011, 12:47:28 pm »
I can guarantee you it won't work

If you want it to work on the dash, then its an RNS or nothing


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: RNS510 56plate FSI match
« Reply #4 on: October 08, 2011, 12:51:25 pm »
You won't regret buying the RNS and come the time to sell the car you can resell it and get most of your money back

There are several members on the forum who can fit and code the gateway and navi.

where are you located?

Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline ripmateyy

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 18
  • Posts: 342
    • Email
Re: RNS510 56plate FSI match
« Reply #5 on: October 08, 2011, 03:00:45 pm »
East Sussex. I looked on the VAG-COM section and a found a guy nearby so would have a PM him about it later on.

What else would be required for me to Get this to work? Is the sound quality of this better or much the same as what I already have, I'm guessing it's the rcd500?

I have soooo many questions! Are there any threads with detailed information on the RNS cause I don't understand all the different versions either!

Sorry for all the noob questions!

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: RNS510 56plate FSI match
« Reply #6 on: October 08, 2011, 04:04:29 pm »
The sound quality is a big improvement over the standard RCD300 and RCD500.
depending on what firmware is on the unit and whether you want to add things like Voice control or Rear View camera will be the deciding factor on what version you should buy
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides