Ok new front brakes finally on and run in, i am planning on testing them properly for the first time at the weekend.
As above they are from a RS4 2002 model.
I ended up with these brakes after much help from DaveB. I would have loved to have gone balls out and got a big brake kit like Tony Danza's Alcons, but i was severely restricted by my bloody work wheels, They already stick out 18 and a half mil further than the Monza's, which meant i had to look for options that did not need a spacer.
Also they had to fit inside my 17in track wheels, which amazingly these do, just.
My final consideration was the usage, I plan to do the ring trip, maximum twice a year, and no more than 4 track days a year to add to this. So for me all this considered, and with a lot of research i decided that i needed something a bit better than the R 32/ S3 set up, but not something as mad as some of the big kits on here.
These should be pretty capable after all they have come off a heavier car with 330 BHP as standard.
The set up is - Audi Rs4 (B5)
Plain semi floating discs. size 360 x 32mil
Goodridge Hoses/Banjo Bolts
2 pot calipers.
Mintex standard road pads + some track pads to swap too when on track. And a pic of my 17in track wheel just fitting over the 360mil disc, pretty mad.
I must give a big thanks to DaveB for persevering with me getting this kit on the car, i believe its the first Mk 5 with these on and it has taken a lot of engineering by Dave to achieve this. The guy really does know his onions.