Make a donation

Author Topic: fitting gti rear valance?  (Read 4534 times)

Offline ukshaun

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 6
  • Posts: 327
  • If in doubt.. flat out
fitting gti rear valance?
« on: October 15, 2011, 04:54:03 pm »
any tips on fitting the rear valance, mines half on atm but i cant get the clips to push in as theres too much free play.

ive tried just wacking it but its not happening.

do i have to take the rear bumper off?
My progress thread www.mk5golfgti.co.uk/forum/index.php/topic,66117.0.html
Mods done: revo map, new south boost gauge, rcd510 dab, gti grill, gti colour coded valance, tinted lights, leds, gti spoiler

Offline Little_Dave

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 9
  • -Receive: 28
  • Posts: 921
Re: fitting gti rear valance?
« Reply #1 on: October 15, 2011, 05:28:55 pm »
There's a few videos on you tube showing how its done for removal but most people tend to suggest taking off the whole bumper and joining the 2 halves and then re fitting  :drinking:

Dave

Offline ukshaun

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 6
  • Posts: 327
  • If in doubt.. flat out
Re: fitting gti rear valance?
« Reply #2 on: October 15, 2011, 05:49:47 pm »
cheers i was thinking i would need to do this
My progress thread www.mk5golfgti.co.uk/forum/index.php/topic,66117.0.html
Mods done: revo map, new south boost gauge, rcd510 dab, gti grill, gti colour coded valance, tinted lights, leds, gti spoiler

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: fitting gti rear valance?
« Reply #3 on: October 15, 2011, 06:04:47 pm »
No need to remove whole bumper. Start at one end and clip it in one by one.
When you get to the middle you'll need to put your hand/fingertips in behind the upper bumper from underneath to offer some resistance.
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline vRS_Pagey

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 66
  • -Receive: 59
  • Posts: 1577
Re: fitting gti rear valance?
« Reply #4 on: October 15, 2011, 06:56:47 pm »
I completely removed mine and fitted to 2 halves in the comfort of my garage, reaching up would have posed a problem for my ham fists, getting between the bumper and the rear armature!!

The entire job took less than half an hour.  :happy2:

His: MK2 Black Magic Skoda Octavia vRS Estate
Hers: MK5 Graphite Blue Pearl VW Golf GT140 -

http://www.mk5golfgti.co.uk/forum/index.php/topic,32783.0.html

Offline StephenED30

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 53
  • Posts: 486
  • Edition 40 No 135
Re: fitting gti rear valance?
« Reply #5 on: October 15, 2011, 10:10:03 pm »
Don’t know if this helps as it is really for fitting the R32 rear end which iv just done, it looks really daunting but once you get to grips with it its surprisingly easy. Really helps to have 2 people to lift the bumper off.  :happy2:

 http://forums.vwvortex.com/showthread.php?3754634

Offline ukshaun

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 6
  • Posts: 327
  • If in doubt.. flat out
Re: fitting gti rear valance?
« Reply #6 on: October 16, 2011, 09:54:52 am »
thanks

i did something else in the end, for some reason theres four screw holes for the number plate, so i used the two that wasnt being used and put a long screw in them, pulled forward on the screw and then pushed on the valance.
My progress thread www.mk5golfgti.co.uk/forum/index.php/topic,66117.0.html
Mods done: revo map, new south boost gauge, rcd510 dab, gti grill, gti colour coded valance, tinted lights, leds, gti spoiler

Offline vRS_Pagey

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 66
  • -Receive: 59
  • Posts: 1577
Re: fitting gti rear valance?
« Reply #7 on: October 16, 2011, 11:46:25 am »
thanks

i did something else in the end, for some reason theres four screw holes for the number plate, so i used the two that wasnt being used and put a long screw in them, pulled forward on the screw and then pushed on the valance.


Improvisation, and adaptation........you must be in the army?  :wink:

His: MK2 Black Magic Skoda Octavia vRS Estate
Hers: MK5 Graphite Blue Pearl VW Golf GT140 -

http://www.mk5golfgti.co.uk/forum/index.php/topic,32783.0.html

Offline ukshaun

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 6
  • Posts: 327
  • If in doubt.. flat out
Re: fitting gti rear valance?
« Reply #8 on: October 16, 2011, 03:45:12 pm »
thanks

i did something else in the end, for some reason theres four screw holes for the number plate, so i used the two that wasnt being used and put a long screw in them, pulled forward on the screw and then pushed on the valance.


Improvisation, and adaptation........you must be in the army?  :wink:

haha i actualy am, adapt and overcome  :happy2:
My progress thread www.mk5golfgti.co.uk/forum/index.php/topic,66117.0.html
Mods done: revo map, new south boost gauge, rcd510 dab, gti grill, gti colour coded valance, tinted lights, leds, gti spoiler