Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: ElsaWin Script Error  (Read 10578 times)

Offline Norbreck21a

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 5
  • -Receive: 22
  • Posts: 603
    • Email
ElsaWin Script Error
« on: August 02, 2011, 02:54:43 pm »
HI Guys,

Had my copy of Elsawin working fine for some time now. I've just gone back into it for the first time in a couple of months, and whilst it loads OK, when I go to the Wiring diagram section, I'm getting the following error :



All I get on screen is a place holder with a red "X" in the top left corner. Not sure if another piece of software is interfering with it, as it was definately working 2 months ago, but I'm not sure where to start ?

Anyone any ideas please ?
Logged

sciroccosig by Sootchucker, on Flickr

Offline vRS Carl

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 282
  • -Receive: 240
  • Posts: 3088
  • I'm the F.A.G (Forum Apple Guru)
Re: ElsaWin Script Error
« Reply #1 on: August 02, 2011, 04:04:00 pm »
Have you removed the SVG Viewer? That's normally the reason why that happens.

Just re-install SVG Viewer and that should solve the problem. :happy2:

Unless of course you have deleted all the data  :scared: :evilgrin:
Logged

Offline Norbreck21a

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 5
  • -Receive: 22
  • Posts: 603
    • Email
Re: ElsaWin Script Error
« Reply #2 on: August 03, 2011, 09:57:12 am »
Quote from: vRS Carl on August 02, 2011, 04:04:00 pm
Have you removed the SVG Viewer? That's normally the reason why that happens.

Just re-install SVG Viewer and that should solve the problem. :happy2:

Unless of course you have deleted all the data  :scared: :evilgrin:

You Sir are a genius. Worked perfectly, many thanks Carl  :happy2:
Logged

sciroccosig by Sootchucker, on Flickr

Offline Cupra R

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 18
  • -Receive: 12
  • Posts: 519
    • Email
Re: ElsaWin Script Error
« Reply #3 on: September 27, 2011, 08:32:29 pm »
Guys, how can I reinstall this SVG viewer you speak of?  I'm getting the exact same problem.  

Not done anything though, to my knowledge  :signLOL:

Laymans terms please  :laugh:

Scrub that, sorted it  :happy2:
« Last Edit: September 27, 2011, 09:03:50 pm by Cupra R »
Logged

Offline claudiusorint

  • Just Arrived
  • **
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 15
    • Email
Re: ElsaWin Script Error
« Reply #4 on: November 05, 2011, 09:05:21 pm »
I hope that in the mean time you solved the issue.
If not, just write down on Google "adobe svg" and you will find it.
Before installation, go to "Control Panel", "Add or Remove Software" and be sure SVG is not there anymore.
Logged
Pages: [1]   Go Up
« previous next »