Make a donation

Author Topic: Help with an error code  (Read 1729 times)

Offline PhilNUK

  • Always Involved
  • ****
  • Thank You
  • -Given: 32
  • -Receive: 6
  • Posts: 267
    • Email
Help with an error code
« on: April 04, 2017, 10:47:28 am »
Hi all,

The missus borrowed the ed30 yesterday and then messaged me say the engine warning light had come on. Typical!
Anyway last night I did an error code reading and got these codes:

Fuel Level Sensor (g)

Sporadic (002) - lower limit exceeded

Rear Heater Core Temp Sensor (g154)


The car runs fine, just googling the codes seems to bring up coil packs but i changed them a couple of years back. Could it be that?

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 690
  • Posts: 8353
Re: Help with an error code
« Reply #1 on: April 04, 2017, 11:48:15 am »
Was that from a generic code reader or VCDS?   

The first error obviously relates to the float sender in the petrol tank. 

The second error, no idea!  Heater matrix temp sensor for the HVAC maybe?

Neither are anything to do with coil packs.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline PhilNUK

  • Always Involved
  • ****
  • Thank You
  • -Given: 32
  • -Receive: 6
  • Posts: 267
    • Email
Re: Help with an error code
« Reply #2 on: April 04, 2017, 12:55:54 pm »
Thanks for the reply! Yeah from a cheap reader, not VCDS

Might clear the codes and see if they reappear.