Make a donation
« previous next »
Pages: [1] 2   Go Down

Author Topic: Retrofit OEM xenon headlights, what's involved?  (Read 34622 times)

Offline Timvgti

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 5
  • Posts: 192
    • Email
Retrofit OEM xenon headlights, what's involved?
« on: November 08, 2011, 01:57:36 pm »
Hi Guys,

I'm looking for a good original pair of xenon headlights with original 4300k d2s lamps, original ballasts/ignitors and a pair of kufatec 12 to 10 pin adapter cables.
Offered plenty at local marketplaces/ebay/etc (The Netherlands), so looking for the best price/quality/completeness before buying one.

I have a VW Golf V GTI from 2005 with original halogen headlights.
I don't need the auto-height-adjustment system and the headlight-washer-system (only requiered on >2007 cars over here).
So what's involved?

- Is there a good 'how-to'?
- How to (partly?) remove the bumper and halogen headlights?
- How to install the new xenon headlights correctly (beam patern/height)?
- Is it still possible to adjust the height using the small scrolling wheel near the light-switch (positions: -&1&2&3)?
- I do not necessarily need the xenon high beam function. H7 as high beams is good enough for me (if I do want to use the xenon shutters/high beam, I need to connect the extra wire coming from the kufatec 12-10pin adapters to the cecm. How to do this?)
- Are all 12 to 10 pin adapters equipped with the extra high-beam-xenon-shutter-wire?
- What/where do I need to recode in vcds? (Xenon with shutters, xenon without shutters? What boxes to check?

Thanks,

Tim



« Last Edit: November 08, 2011, 02:00:50 pm by Timvgti »
Logged

Offline Timvgti

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 5
  • Posts: 192
    • Email
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #1 on: November 09, 2011, 10:26:55 am »
Found a 'how-to': http://www.myturbodiesel.com/1000q/a5/HID-retrofit-Jetta-a5.htm

But doesn't answer all my questions, like if it's still possible to use the height-adjusment-scroll-wheel?
Also the how to is not complete if you are not a member on myturbodiesel, like me...
« Last Edit: November 09, 2011, 10:30:07 am by Timvgti »
Logged

Offline Timvgti

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 5
  • Posts: 192
    • Email
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #2 on: November 14, 2011, 12:22:27 pm »
Guys?

Logged

Offline parks

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 17
  • Posts: 370
  • Red ED30 No. 1778 Detailing World member
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #3 on: November 14, 2011, 12:42:29 pm »
video guide here from ECS tuning



then the Kufatec looms plug straight in. additional wire NOT required.
Level wheel will not work.
xenons without shutters in VCDS required if the additional wire is not used.
Logged
Standard: Rear parking sensors, Parrot Bluetooth
Retro fitted: MFSW buttons, RCD510, Boot pop, Black Monza II, Xenons, Audi jacking points, open fog light grills.

Offline Timvgti

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 5
  • Posts: 192
    • Email
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #4 on: November 15, 2011, 03:51:13 pm »
Thanks 'Parks'!

So no manual height control anymore?
How to properly install the headlights at the correct beam-heights?
Mark the old headlight beam patterns on the garage door?
Logged

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=pu4flm6gsm9i8um3mk7b8mn5np&/topic,19740.0.html
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #5 on: November 15, 2011, 05:22:08 pm »
Quote from: Timvgti on November 15, 2011, 03:51:13 pm
Thanks 'Parks'!

So no manual height control anymore?

CORRECT

How to properly install the headlights at the correct beam-heights?

Easiest way is to take it down to an MOT tester and get them to set them... i did mine myself though

Mark the old headlight beam patterns on the garage door?

That should work, but don't move the car once you've marked them up

Rich
Logged

Offline marko

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 16
  • -Receive: 33
  • Posts: 903
    • Email
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #6 on: November 04, 2012, 10:06:06 pm »
anyone any idea what repair wires are needed to connect to cecm to operate hi beam shutters ???
have the kufatec looms with the extra wire but i need little pin connections for the cecm
 :confused:
Logged
2007 TR gt170...heated leather,underseat drawers,auto-levelling bi-xenons,puddle leds,chrome switches,footwell lights f+r,cruise control and ed30 rear lamps,LED interior....carbon highline clocks,ed30 front spoiler,RNS 510 P+MDI,mk6 gti gearknob,TPMS done,complete r32 trim kit+ MFSW,r32 f+r brakes,RLS fitted.headlamp washers,folding mirrors and boot pop,mk6 RVC,19"Helios,AP coilies,valeo LEDs  ...dpf delete and remap to finish off

Offline jason_rmh

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 69
  • -Receive: 81
  • Posts: 911
Re: Re: Retrofit OEM xenon headlights, what's involved?
« Reply #7 on: November 04, 2012, 10:16:10 pm »
The kufatec loom should already have the extra wire on each connector, with the pin attached ready to slot into the cecm.

Does yours not have them attached?
Logged

VCDS (Preston, Lancashire)

Offline marko

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 16
  • -Receive: 33
  • Posts: 903
    • Email
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #8 on: November 04, 2012, 10:22:24 pm »
no man...got them supplied with the headlamps but last owner ran the h7 hi beam so he cut off the extra wire bar last 6 inches
 :confused:
Logged
2007 TR gt170...heated leather,underseat drawers,auto-levelling bi-xenons,puddle leds,chrome switches,footwell lights f+r,cruise control and ed30 rear lamps,LED interior....carbon highline clocks,ed30 front spoiler,RNS 510 P+MDI,mk6 gti gearknob,TPMS done,complete r32 trim kit+ MFSW,r32 f+r brakes,RLS fitted.headlamp washers,folding mirrors and boot pop,mk6 RVC,19"Helios,AP coilies,valeo LEDs  ...dpf delete and remap to finish off

Offline marko

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 16
  • -Receive: 33
  • Posts: 903
    • Email
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #9 on: November 05, 2012, 01:37:48 pm »
anyone have a clue??
getting nowhere with local dealer...
 :indifferent:
Logged
2007 TR gt170...heated leather,underseat drawers,auto-levelling bi-xenons,puddle leds,chrome switches,footwell lights f+r,cruise control and ed30 rear lamps,LED interior....carbon highline clocks,ed30 front spoiler,RNS 510 P+MDI,mk6 gti gearknob,TPMS done,complete r32 trim kit+ MFSW,r32 f+r brakes,RLS fitted.headlamp washers,folding mirrors and boot pop,mk6 RVC,19"Helios,AP coilies,valeo LEDs  ...dpf delete and remap to finish off

Offline JoeDarKa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 57
  • -Receive: 73
  • Posts: 3188
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #10 on: November 05, 2012, 04:09:26 pm »
Take a picture of the actual connectors. Could be the same as the seat ones iv just bought!
Logged


GT Sport - Reflex Silver 2.0 TDI My Build

Offline marko

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 16
  • -Receive: 33
  • Posts: 903
    • Email
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #11 on: November 05, 2012, 05:04:12 pm »
didnt want to strip out the cecm until i have all the bits i need to finish in one go
found some info on a US vw site.....
thanks man
Logged
2007 TR gt170...heated leather,underseat drawers,auto-levelling bi-xenons,puddle leds,chrome switches,footwell lights f+r,cruise control and ed30 rear lamps,LED interior....carbon highline clocks,ed30 front spoiler,RNS 510 P+MDI,mk6 gti gearknob,TPMS done,complete r32 trim kit+ MFSW,r32 f+r brakes,RLS fitted.headlamp washers,folding mirrors and boot pop,mk6 RVC,19"Helios,AP coilies,valeo LEDs  ...dpf delete and remap to finish off

Offline marko

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 16
  • -Receive: 33
  • Posts: 903
    • Email
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #12 on: November 05, 2012, 05:09:14 pm »
seems 000 979 025e and 000 979 151e are the two connecting terminals needed for anyone who wants to wire in the hibeam shutter on their xenons
 :happy2: :happy2:
Logged
2007 TR gt170...heated leather,underseat drawers,auto-levelling bi-xenons,puddle leds,chrome switches,footwell lights f+r,cruise control and ed30 rear lamps,LED interior....carbon highline clocks,ed30 front spoiler,RNS 510 P+MDI,mk6 gti gearknob,TPMS done,complete r32 trim kit+ MFSW,r32 f+r brakes,RLS fitted.headlamp washers,folding mirrors and boot pop,mk6 RVC,19"Helios,AP coilies,valeo LEDs  ...dpf delete and remap to finish off

Offline Richie18-1987

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 57
    • Email
Re: Retrofit OEM xenon headlights, what's involved?
« Reply #13 on: November 23, 2012, 01:18:57 pm »
Hi

Sorry to sound dumb but what are you referring to when you say xenon shutters?

I've never heard that term before also you say xenons with and xenons without

Whats the difference I thought that were all the same.

I haven't done this mod yet so would be handy to know when I come round to it.

Regards

Rich.
Logged

Offline jason_rmh

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 69
  • -Receive: 81
  • Posts: 911
Re: Re: Retrofit OEM xenon headlights, what's involved?
« Reply #14 on: November 23, 2012, 04:42:13 pm »
The shutters when wired up will open on high beam, using the xenon for high beam illumination in addition to the halogen bulb.
Without them wired up, only the halogen bulb is used.

All standard golf xenons have the bi xenon shutter, but you have to run a wire to the cecm to activate it.

Jas
Logged

VCDS (Preston, Lancashire)
Pages: [1] 2   Go Up
« previous next »