Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: OEM Numberplate LED Issues  (Read 2434 times)

Offline edition_30

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 3
  • Posts: 253
OEM Numberplate LED Issues
« on: November 13, 2011, 01:36:09 pm »
I purchased a set of OEM number plate leds and im having some issues.

Originally I thought the set may be faulty but I replaced them and get exactly the same issue.

Sometimes when I turn the ignition I get the bulb out warning saying that my number plate lights do not work... If I turn on my headlights for a few seconds then the warning disappears and the leds function as normal...

Is it possible that some sort of coding could be required as I was told that the leds draw less current and could be confusing the car to think that they are not working...

Any ideas?
Logged

Offline Little_Dave

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 9
  • -Receive: 28
  • Posts: 921
Re: OEM Numberplate LED Issues
« Reply #1 on: November 13, 2011, 01:38:53 pm »
Think you need to make sure you have the canbus LED's so that you don't get a fault light thrown up  :happy2:

Dave
Logged

Offline ub7rm

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 35
  • -Receive: 43
  • Posts: 807
Re: OEM Numberplate LED Issues
« Reply #2 on: November 13, 2011, 02:23:15 pm »
I think he means the OEM one's designed for the mk6 et al?

If so I guess that these cars are correctly coded to know they are LED's rather than the mk5's which are not expecting such a low draw. Probably better off with the aftermarket ones which imitate the filiment bulbs.
Logged
Sepang Blue S4 BE Avant

Offline kevinm

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 25
  • Posts: 184
  • No. 728
Re: OEM Numberplate LED Issues
« Reply #3 on: November 13, 2011, 05:19:34 pm »
I disabled "cold lamp diagnosis" for the number plate bulbs with vcds and have had no issues with the oem led's. This hasn't worked for everyone though. I bought the kufatec resistors just in case but didn't need them.

The option to disable the check wasn't available in my friends 2009 GTD so he had to use the kufatec resistors.
Logged

Offline edition_30

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 3
  • Posts: 253
Re: OEM Numberplate LED Issues
« Reply #4 on: November 13, 2011, 05:29:10 pm »
Quote from: kevinm on November 13, 2011, 05:19:34 pm
I disabled "cold lamp diagnosis" for the number plate bulbs with vcds and have had no issues with the oem led's. This hasn't worked for everyone though. I bought the kufatec resistors just in case but didn't need them.

The option to disable the check wasn't available in my friends 2009 GTD so he had to use the kufatec resistors.

what year is your car as mine is an 07...

before you disabled the cold lamp diagnosis was you experiencing issues?

Do you have a link to the resistors?
Logged

Offline daveangel

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 6
  • Posts: 154
    • Email
Re: OEM Numberplate LED Issues
« Reply #5 on: November 13, 2011, 07:00:26 pm »
wheres cold lamp in vcds??  i could use that?  is it just plate lights are all?
Logged

Offline kevinm

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 25
  • Posts: 184
  • No. 728
Re: OEM Numberplate LED Issues
« Reply #6 on: November 15, 2011, 10:12:58 am »
Quote from: edition_30 on November 13, 2011, 05:29:10 pm
Quote from: kevinm on November 13, 2011, 05:19:34 pm
I disabled "cold lamp diagnosis" for the number plate bulbs with vcds and have had no issues with the oem led's. This hasn't worked for everyone though. I bought the kufatec resistors just in case but didn't need them.

The option to disable the check wasn't available in my friends 2009 GTD so he had to use the kufatec resistors.

what year is your car as mine is an 07...

before you disabled the cold lamp diagnosis was you experiencing issues?

Do you have a link to the resistors?

I'll answer your pm here so everyone can see it.

My car is an April 2007 car. I didn't try it without disabling cold lamp diagnosis disabled.

You can get the resistors here:
http://www.kufatec.de/shop/product_info.php/info/p9003_c325_Adapter-LED-Kennzeichenbeleuchtung---VW.html
Kufatec have high delivery charges.
Logged

Offline Betty02

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 10
  • -Receive: 11
  • Posts: 685
    • iBett
Re: OEM Numberplate LED Issues
« Reply #7 on: November 15, 2011, 10:31:06 am »
Was thinking of doing this on my 05 plate car but now reading this a little un-sure.

Disabling that setting in VCDS will this mean that the bulb out error light will not work when a bulb does actually go?
Logged
ADMIN NOTICE: Please do not use the site for advertising!

Offline Betty02

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 10
  • -Receive: 11
  • Posts: 685
    • iBett
Re: OEM Numberplate LED Issues
« Reply #8 on: November 15, 2011, 10:33:53 am »
Logged
ADMIN NOTICE: Please do not use the site for advertising!

Offline david25

  • Always Involved
  • ****
  • Thank You
  • -Given: 19
  • -Receive: 7
  • Posts: 190
    • Email
Re: OEM Numberplate LED Issues
« Reply #9 on: November 15, 2011, 02:54:31 pm »
Hi, this wont help you, but they work fine in my 2006 GTI, see http://www.mk5golfgti.co.uk/forum/index.php/topic,30092.0.html
and I didnt mess around with any VCDS coding.

I can only suggest you purchase the Kufatec kit
Logged

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: OEM Numberplate LED Issues
« Reply #10 on: November 15, 2011, 03:08:38 pm »
Logged
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline edition_30

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 3
  • Posts: 253
Re: OEM Numberplate LED Issues
« Reply #11 on: November 15, 2011, 10:40:16 pm »
Quote from: kevinm on November 15, 2011, 10:12:58 am
Quote from: edition_30 on November 13, 2011, 05:29:10 pm
Quote from: kevinm on November 13, 2011, 05:19:34 pm
I disabled "cold lamp diagnosis" for the number plate bulbs with vcds and have had no issues with the oem led's. This hasn't worked for everyone though. I bought the kufatec resistors just in case but didn't need them.

The option to disable the check wasn't available in my friends 2009 GTD so he had to use the kufatec resistors.

what year is your car as mine is an 07...

before you disabled the cold lamp diagnosis was you experiencing issues?

Do you have a link to the resistors?

I'll answer your pm here so everyone can see it.

My car is an April 2007 car. I didn't try it without disabling cold lamp diagnosis disabled.

You can get the resistors here:
http://www.kufatec.de/shop/product_info.php/info/p9003_c325_Adapter-LED-Kennzeichenbeleuchtung---VW.html
Kufatec have high delivery charges.


Do you still have your resistors & would you consider selling?
Logged

Offline kevinm

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 25
  • Posts: 184
  • No. 728
Re: OEM Numberplate LED Issues
« Reply #12 on: November 16, 2011, 01:14:13 pm »
Quote from: Betty02 on November 15, 2011, 10:31:06 am
Was thinking of doing this on my 05 plate car but now reading this a little un-sure.

Disabling that setting in VCDS will this mean that the bulb out error light will not work when a bulb does actually go?

Yes you wont know get a warning.

Quote from: skard on November 15, 2011, 03:08:38 pm
I bought these on the recommendation of another member http://www.ebay.co.uk/itm/ERROR-FREE-3-SMD-NUMBER-PLATE-BULBS-BMW-E46-E39-E60-E90-/290603420064?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43a95049a0 - plug and play with built in resistor.

I had led's like them before and they are way bluer than the oem ones.

Quote from: edition_30 on November 15, 2011, 10:40:16 pm
Do you still have your resistors & would you consider selling?

Ya they are still in the kufatec box at home. I'll send you a pm :happy2:
Logged

Offline edition_30

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 3
  • Posts: 253
Re: OEM Numberplate LED Issues
« Reply #13 on: November 16, 2011, 01:37:00 pm »


Ya they are still in the kufatec box at home. I'll send you a pm :happy2:
[/quote]

 :happy2:
Logged
Pages: [1]   Go Up
« previous next »