Make a donation

Author Topic: Is it true???  (Read 1252 times)

Offline Jussa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 23
  • -Receive: 12
  • Posts: 1051
  • Bicester
    • Email
Is it true???
« on: November 17, 2011, 06:17:16 pm »
That if you don't run an uprated intercooler at stage 2+ on a K04 the Revo map is watered down, ie. less boost??  :confused:
2010 3dr phantom black S-Tronic S3 - BCS TBE with 3½" DP - LOBA LO4xx turbo - LOBA HPFP - Revo CAI - H&R 25mm lowering springs - Forge 11mm spacers - RS4 fuel Pressure valve - THS intercooler - H&R front and rear ARB's - AEM water methanol injection

Offline PDT

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 3
  • -Receive: 142
  • Posts: 2010
    • Email
Re: Is it true???
« Reply #1 on: November 17, 2011, 06:44:10 pm »
The stg2+ (and all other revo tfsi maps) are set up by the tuner according to the requirements of the engine, theres no set map for a car with/without an intercooler.

In general you can add some more boost/ignition timing with a fmic equipped car = more power.

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: Is it true???
« Reply #2 on: November 17, 2011, 06:53:11 pm »
That if you don't run an uprated intercooler at stage 2+ on a K04 the Revo map is watered down, ie. less boost??  :confused:


They will run a lower setting d imagine otherwise you would have a heatsoaking nightmare. It would still be alot stronger than stage 2 though.  Then when you get an IC you can just turn the boost/timing up a nudge for more power

Offline Jussa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 23
  • -Receive: 12
  • Posts: 1051
  • Bicester
    • Email
Re: Is it true???
« Reply #3 on: November 17, 2011, 07:17:10 pm »
So if you're running an S3  without the uprated IC would the boost be set higher than say an Eddy without the uprated IC  :confused:
I assume the standard S3 IC is better than an Eddy's one???
2010 3dr phantom black S-Tronic S3 - BCS TBE with 3½" DP - LOBA LO4xx turbo - LOBA HPFP - Revo CAI - H&R 25mm lowering springs - Forge 11mm spacers - RS4 fuel Pressure valve - THS intercooler - H&R front and rear ARB's - AEM water methanol injection

Offline blackmagic

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 5
  • Posts: 95
Re: Is it true???
« Reply #4 on: November 17, 2011, 07:30:13 pm »
Standard GTI and ED30 both use the same intercooler. The S3 intercooler is therefore a viable upgrade path for both. You could then add a FMIC to this if needed. I changed mine standard GTI to S3 just bought parts from TPS and fitted myself one sat morning. You do have to take most of the front of the car off tho so prob best only if you handy with the spanners.


Black GTI K03 Revo Stage 2+,

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: Is it true???
« Reply #5 on: November 18, 2011, 02:20:18 pm »
forgot you were getting an S3.  You'll be 100% fine with that as thats what alot of guys upgrade to wghen going stage 2+ as its alot better than the std GTI/vRS/Cupra intercoolers