Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: How to remove/clean  (Read 1596 times)

Offline Banham

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 5
  • -Receive: 15
  • Posts: 639
  • GTI MK6
    • Email
How to remove/clean
« on: December 01, 2011, 08:11:34 pm »
Planning on giving my car some winter protection this weekend and i just want to no how to remove this thing because it has been on my car since i have had it in Feb and never tried to remove it. It is by the front passenger door hinge. What could be used to clean it??



Logged

Offline andrewparker

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 78
  • Posts: 1770
Re: How to remove/clean
« Reply #1 on: December 01, 2011, 08:12:47 pm »
What the chuff is it?!
Logged

Offline dodds-gttdi

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 22
  • -Receive: 34
  • Posts: 1118
  • Edinburgh
    • Email
Re: How to remove/clean
« Reply #2 on: December 01, 2011, 08:19:03 pm »
Possibly the silicone grease that VW use when they service your car. This will probably have been white at one point.  :surprised:
Logged

Offline Daffy

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 5
  • Posts: 77
Re: How to remove/clean
« Reply #3 on: December 01, 2011, 08:58:59 pm »
APC, Glue and Tar remover such as Tardis or if you don't have these try washing up liquid pour it on direct and agitate then use a strong solution of it to wash it. Wipe off what you can with a cloth before starting. Make sure you rinse the area well after.
Logged

Offline Banham

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 5
  • -Receive: 15
  • Posts: 639
  • GTI MK6
    • Email
Re: How to remove/clean
« Reply #4 on: December 02, 2011, 06:17:56 pm »
Quote from: Daffy on December 01, 2011, 08:58:59 pm
APC, Glue and Tar remover such as Tardis or if you don't have these try washing up liquid pour it on direct and agitate then use a strong solution of it to wash it. Wipe off what you can with a cloth before starting. Make sure you rinse the area well after.

I will try using washing up liquid because i dont have any of those products but could be added to my collection if the washing liquid doesnt work.
Hopefully it wont be to hard to remove but just to have to how it goes

Thanks for the replies  :happy2:
Logged

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: How to remove/clean
« Reply #5 on: December 02, 2011, 06:45:12 pm »
+1 for tar remover.
Logged

The GTI isn't just a machine. It's very much a living, breathing thing.

hugh jass

  • Guest
Re: How to remove/clean
« Reply #6 on: December 02, 2011, 07:22:22 pm »
Turps or white spirit
Logged

Offline CupraNigel

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 22
    • Email
Re: How to remove/clean
« Reply #7 on: December 02, 2011, 08:23:56 pm »
You could try petrol, as long as you dont smoke...
Logged
Project stage 2 and a Quafe LSD

Offline Banham

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 5
  • -Receive: 15
  • Posts: 639
  • GTI MK6
    • Email
Re: How to remove/clean
« Reply #8 on: December 04, 2011, 06:56:39 pm »
I managed to get rid of it   :smiley: it was sticky and i believe it was silicone. Put washing up liquid on it first which removed most of it and broke it up nicely and then i put a tiny bit of white spirit to clean the rest off and now i am left with this which is alot better than what is was before



Thanks guys for your help  :happy2:
Logged
Pages: [1]   Go Up
« previous next »