Make a donation

Author Topic: Badge replacement  (Read 2361 times)

Offline Sug

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 5
  • Posts: 397
    • Email
Badge replacement
« on: December 10, 2011, 07:12:55 pm »
I know this will have been posted before but cant seem to find it, I am wanting to replace the VW badges on my car. front seems easy enough either prise off or remove grill???? As for the back???? :confused:
EDITION 30 GONE, MK6 R GONE........AUDI 8V S3.....Stock for now

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Badge replacement
« Reply #1 on: December 10, 2011, 09:14:10 pm »
Back depends on what year the car is but will likely involve removing the whole mechanism.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline Sug

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 5
  • Posts: 397
    • Email
Re: Badge replacement
« Reply #2 on: December 10, 2011, 09:20:57 pm »
Its a 2008 fella  :happy2:
EDITION 30 GONE, MK6 R GONE........AUDI 8V S3.....Stock for now

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Badge replacement
« Reply #3 on: December 11, 2011, 12:44:28 am »
Might be able to prise off the metal VW bit on the rear badge.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline nathangallo

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 24
  • -Receive: 4
  • Posts: 509
    • Email
Re: Badge replacement
« Reply #4 on: December 11, 2011, 05:20:45 pm »
I know this will have been posted before but cant seem to find it, I am wanting to replace the VW badges on my car. front seems easy enough either prise off or remove grill???? As for the back???? :confused:

how did you get the front one off fella is it just simply prising it away, it seems that way ?
« Last Edit: December 11, 2011, 05:30:02 pm by nathangallo »

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Badge replacement
« Reply #5 on: December 11, 2011, 06:23:53 pm »
The front VW badge can be removed by pushing it in and turning it (can't remember if clockwise/anticlockwise) but this has a good chance of breaking the clips. Better to remove the grille (two screws at top, two under where number plate plinth is) and then undo it from behind.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline Sug

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 5
  • Posts: 397
    • Email
Re: Badge replacement
« Reply #6 on: December 11, 2011, 07:25:03 pm »
Yeh just push in and turn anti clockwise and it pulls out. be carefull not to break one of the three clips. I broke one but it still went back on fine. The back is a bit more tricky.
 Remove the 2 screws in internal tailgate cover and pull very firmly to remove. (use an window scraper or similar to lever it if need be) then

Remove the connector block and the 3 Torx screws securing boot handle. (you may need to loosen the wiper motor to get to the bottom screw)
EDITION 30 GONE, MK6 R GONE........AUDI 8V S3.....Stock for now

Offline nathangallo

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 24
  • -Receive: 4
  • Posts: 509
    • Email
Re: Badge replacement
« Reply #7 on: December 11, 2011, 07:39:52 pm »
The front VW badge can be removed by pushing it in and turning it (can't remember if clockwise/anticlockwise) but this has a good chance of breaking the clips. Better to remove the grille (two screws at top, two under where number plate plinth is) and then undo it from behind.

may just take the gamble by twisting!

if not isnt it the torx on the top ? in the bonnet?

Offline Sug

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 5
  • Posts: 397
    • Email
Re: Badge replacement
« Reply #8 on: December 11, 2011, 08:20:23 pm »
Think there is also 2 under number plate aswel
EDITION 30 GONE, MK6 R GONE........AUDI 8V S3.....Stock for now

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Badge replacement
« Reply #9 on: December 11, 2011, 08:26:17 pm »
As I said, two at the top and two under the number plate plinth. All torx I think.

The GTI isn't just a machine. It's very much a living, breathing thing.