Make a donation

Author Topic: Carbon Wrapped Inserts!  (Read 2402 times)

Offline AjayB

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 2
  • Posts: 266
  • Golf GT TDI
    • Email
Carbon Wrapped Inserts!
« on: December 23, 2011, 12:58:39 pm »
Does anyone have any guides or tips on how to remove the inserts on the 4 doors and the 3 inserts on the dashboard? Also how to remove the trim around the the cigarette tray area as i am about to wrap these in some carbon vinyl! Any advice would be appreciated, thanks

Ajay
« Last Edit: December 24, 2011, 02:04:16 pm by AjayB »

Build: http://www.mk5golfgti.co.uk/forum/index.php/topic,40699.0.html

Golf MK5 GT TDI | 35mm H&R Springs | Silver Cabon Fibre Inlays | 20% Rear Tints | Backbox Delete- Dual Tips | GTI Rear Valance

To Do: RNS/RCD510 | FBSW | Black BBS CH 18"

Offline AjayB

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 2
  • Posts: 266
  • Golf GT TDI
    • Email
Re: Removing trim/inserts!
« Reply #1 on: December 23, 2011, 01:13:34 pm »
I know about the door and dash ones now, just need to know how to get the cigarette tray area out..

Build: http://www.mk5golfgti.co.uk/forum/index.php/topic,40699.0.html

Golf MK5 GT TDI | 35mm H&R Springs | Silver Cabon Fibre Inlays | 20% Rear Tints | Backbox Delete- Dual Tips | GTI Rear Valance

To Do: RNS/RCD510 | FBSW | Black BBS CH 18"

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Without traction power is nothing!

Offline AjayB

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 2
  • Posts: 266
  • Golf GT TDI
    • Email
Re: Removing trim/inserts!
« Reply #3 on: December 23, 2011, 01:20:09 pm »
Cheers mate, i saw this one it shows the dash and doors but not how to get the area around the cigarette tray out? Any ideas?

Build: http://www.mk5golfgti.co.uk/forum/index.php/topic,40699.0.html

Golf MK5 GT TDI | 35mm H&R Springs | Silver Cabon Fibre Inlays | 20% Rear Tints | Backbox Delete- Dual Tips | GTI Rear Valance

To Do: RNS/RCD510 | FBSW | Black BBS CH 18"

Offline gizmo68

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 7
  • Posts: 155
  • We're here for a good time, not a long time
Re: Removing trim/inserts!
« Reply #4 on: December 23, 2011, 01:24:48 pm »
From memory you need to remove the gear stick gaiter and you will then see the two torx screws holding the ashtray in  :happy2:
VCDS HEX-NET & VCP owner (covers all VAG cars)
(PM me if you require VCDS or VCP coding or scanning in Kent)

Offline AjayB

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 2
  • Posts: 266
  • Golf GT TDI
    • Email
Re: Removing trim/inserts!
« Reply #5 on: December 23, 2011, 01:26:48 pm »
Thanks mate, i'll give it a go  :pomppomp:

Build: http://www.mk5golfgti.co.uk/forum/index.php/topic,40699.0.html

Golf MK5 GT TDI | 35mm H&R Springs | Silver Cabon Fibre Inlays | 20% Rear Tints | Backbox Delete- Dual Tips | GTI Rear Valance

To Do: RNS/RCD510 | FBSW | Black BBS CH 18"

Offline gizmo68

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 7
  • Posts: 155
  • We're here for a good time, not a long time
Re: Removing trim/inserts!
« Reply #6 on: December 23, 2011, 01:29:49 pm »
Google found a guide  :happy2:

http://www.scottishvag.net/viewtopic.php?f=101&t=48021

(you don't need to remove the gaiter or gear knob from the stick)
VCDS HEX-NET & VCP owner (covers all VAG cars)
(PM me if you require VCDS or VCP coding or scanning in Kent)

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Without traction power is nothing!

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Removing trim/inserts!
« Reply #8 on: December 23, 2011, 01:31:42 pm »
Lol, same guide on two sites...    :xmassmiley:
Without traction power is nothing!

Offline AjayB

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 2
  • Posts: 266
  • Golf GT TDI
    • Email
Re: Removing trim/inserts!
« Reply #9 on: December 24, 2011, 01:54:04 am »
Thanks guys, does anyone have any tips about geting the wrap around the curved corners of the trim?

Build: http://www.mk5golfgti.co.uk/forum/index.php/topic,40699.0.html

Golf MK5 GT TDI | 35mm H&R Springs | Silver Cabon Fibre Inlays | 20% Rear Tints | Backbox Delete- Dual Tips | GTI Rear Valance

To Do: RNS/RCD510 | FBSW | Black BBS CH 18"

Offline dub singh

  • Always Involved
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 13
  • Posts: 311
  • Snakebite Chasers...
    • Email
Re: Removing trim/inserts!
« Reply #10 on: December 24, 2011, 02:00:55 am »
Use a hair dryer to warm the wrap up.. makes it so much easier to wrap around edges/corners  :happy2:
If you're having Audio problems i feel bad for ya son... I've got 99 problems but Bass aint one!

Offline AjayB

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 2
  • Posts: 266
  • Golf GT TDI
    • Email
Re: Carbon Wrapped Inserts!
« Reply #11 on: December 24, 2011, 02:06:20 pm »
1st attempt at carbon wrapping the inserts, i'm pretty pleased for now!





Build: http://www.mk5golfgti.co.uk/forum/index.php/topic,40699.0.html

Golf MK5 GT TDI | 35mm H&R Springs | Silver Cabon Fibre Inlays | 20% Rear Tints | Backbox Delete- Dual Tips | GTI Rear Valance

To Do: RNS/RCD510 | FBSW | Black BBS CH 18"