Make a donation
« previous next »
Pages: [1] 2   Go Down

Author Topic: Which Torque wrench for general use (if such a thing exists)  (Read 1789 times)

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Which Torque wrench for general use (if such a thing exists)
« on: December 24, 2011, 05:01:36 pm »
So i need to replace the tools stolen from my garage which pretty much means i have to start from scratch. I have pretty much everything i need either planned or bought but i'm not sure which torque wrench to get for general maintenance.

In the next couple of months i will be replacing the rear shocks, front drop links and a couple of other things so what i need is a torque wrench pretty much for general use.  

What would you suggest 08-60Nm
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_178843_langId_-1_categoryId_165469

Or 40-200Nm
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_180255_langId_-1_categoryId_165469

Halfords have a 10% discount offer until Midnight Christmas day so with Quidco at 4% i will be saving 14% if i buy with in the next 24 hours.
Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline Nodz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 73
  • -Receive: 103
  • Posts: 1977
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,29264.0.html
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #1 on: December 24, 2011, 05:08:48 pm »
I'd say the 2nd one on the basis of the Nm range the recommended torque setting for wheel nuts is 120Nm but as for the wrench itself I have no idea how good it is
Logged

Offline Phil Miller

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 86
  • -Receive: 34
  • Posts: 744
    • Email
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #2 on: December 24, 2011, 05:09:18 pm »
If it was me I'd get the 40nm to 200 cos let's face it anything lower than 40nm isnt a must have correct figure for a diyer, I've got both in the snap on tech wrench but I use them all day everyday


Plus you gotta love quidco
Logged
2004 Golf 5dr TDI, 140 remap, GTI front bumper, skirts, highline cluster, 18in wheels, jamax coilovers, winter pack
WANTED HIGHLINE CCM AND CECM PLEASE PM ME IF YOU CAN HELP

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #3 on: December 24, 2011, 05:15:27 pm »
I absolutely love Quidco. My wife and i have been using it for at least fours years and have saved over £2.3K!

Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline Phil Miller

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 86
  • -Receive: 34
  • Posts: 744
    • Email
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #4 on: December 24, 2011, 05:19:58 pm »
2.3k thats great :happy2: I've only just joined and so far it's about 40quid I joined just after we had sky installed could have been an extra £100 :sad1:
Logged
2004 Golf 5dr TDI, 140 remap, GTI front bumper, skirts, highline cluster, 18in wheels, jamax coilovers, winter pack
WANTED HIGHLINE CCM AND CECM PLEASE PM ME IF YOU CAN HELP

Offline Matto

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 24
  • -Receive: 116
  • Posts: 1894
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,37071.0.html
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #5 on: December 24, 2011, 05:21:10 pm »
Halfords pro stuff is supposed to be pretty good. I use a 40-200nm Norbar.
Logged

Offline ub7rm

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 35
  • -Receive: 43
  • Posts: 807
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #6 on: December 24, 2011, 05:40:28 pm »
Quote from: Matto on December 24, 2011, 05:21:10 pm
Halfords pro stuff is supposed to be pretty good. I use a 40-200nm Norbar.

Also got a - I think - 310 Nm Norbar.  Laughs in the face of wheel bolts, though unfortunately I've had to use it to loosen wheel bolts after the tyre changers have had their fun.  :fighting:

How about 1000Nm?



Covers all the bases ...  :grin:
Logged
Sepang Blue S4 BE Avant

Offline MAT ED30

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 82
  • Posts: 5728
  • Vwr fan boy
    • Email
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #7 on: December 24, 2011, 06:09:12 pm »
Try machine mart too
Logged

Mods yes but way too many to stick in this little box

Offline Tfsi_Mike

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 241
  • -Receive: 309
  • Posts: 10222
  • Go Large or Go Home
    • Tfsi Mikes Money Pit AKS / TTE / RTech St2+ Cupra
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,32721.msg402587.html#msg402587
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #8 on: December 24, 2011, 06:28:18 pm »

YHPM  :happy2:
Logged

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #9 on: December 24, 2011, 06:35:55 pm »
Mike

PM received and replied  :happy2:
Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #10 on: December 24, 2011, 09:53:29 pm »
I use the 60 to 300 nm halfords wrench for wheel bolts and general stuff, then I have two of the snap on digital torque and angle wrenches for engine builds and more accurate stuff.

I would deffo recommend the halfords wrenches.
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline PDT

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 3
  • -Receive: 142
  • Posts: 2010
    • Email
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #11 on: December 26, 2011, 09:17:18 pm »
I have both of the halfords torque wrenches, ideal for everyday stuff.
Logged

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7835
  • ED30 No.1412
    • Email
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #12 on: December 26, 2011, 11:39:57 pm »
I use a Halfrauds professional one. Also bought a breaker bar, and two alloy-friendly sockets (one for each tool). Might be useful to have a "mini" one for smaller applications.
Logged

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #13 on: January 07, 2012, 04:16:49 pm »
Picked up a Trade card this afternoon and saved nearly £16 on the 60-300nm Torque wrench. Very happy.

The application process was fairly straight forward and i wasn't asked to produce anything other than my drivers licence  :happy2:
Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline Tfsi_Mike

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 241
  • -Receive: 309
  • Posts: 10222
  • Go Large or Go Home
    • Tfsi Mikes Money Pit AKS / TTE / RTech St2+ Cupra
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,32721.msg402587.html#msg402587
Re: Which Torque wrench for general use (if such a thing exists)
« Reply #14 on: January 07, 2012, 04:18:55 pm »
Quote from: Degudodger on January 07, 2012, 04:16:49 pm
Picked up a Trade card this afternoon and saved nearly £16 on the 60-300nm Torque wrench. Very happy.

The application process was fairly straight forward and i wasn't asked to produce anything other than my drivers licence  :happy2:

Been so busy mate! Lucky for me I didn't get round to posting it as it saved me money this week!

Glad you've got a card and saved money!

 :happy2:
Logged
Pages: [1] 2   Go Up
« previous next »