Author Topic: Data logging results - Bit concerned (Read 3080 times)

bacillus · « **Reply #15 on:** December 23, 2011, 10:54:17 am »

What year is your car as if it's an early model then removing the hpfp may prove a little difficult/fiddley if you have a banjo bolt pump attachment.

ktlstar · « **Reply #16 on:** December 23, 2011, 11:00:09 am »

57 plate dude.

It's ok, I went out and remove the pump and to check the follower (So i know what im pretty much doing tomorrow*install hpfp*). Took me 30minutes. The only pain was trying to move the hose clamp to the front as it was sitting near at the back of the pump.

I hope after installing it, it will be all good with the revo settings it has. Will update and maybe you guys can clarify for me if all good

ktlstar · « **Reply #17 on:** December 24, 2011, 12:07:54 pm »

Fitted the fuel internals early this morning, then did a few quick runs. I forgot to log the RPM however at 130bar of pressure you know im at full WOT.

Heres a 2 logs / chart. I am still concerned seeing -0.8. I thought -0.5 is max you want ????? As you can the pump is holding up with the requsted fuel.