JKM Rolling Road - 11th February 2012....

[maxload]

Was pleased with my hp as I thought I would get 270hp but I got 279hp.
But there was a problem at 5100 revs when it dipped in power. Thanks goes to SteveP who logged it and it turned out to be a mis fire on cylender 3 , no other faults. It's in for a service on tuesday , so hopefully some new plugs will solve the problem .
Great day , thanks to everyone 

[GarethB]

[GarethB]

[maxload]

Was good to meet you Gareth. I'll be coming your way to get my Eibachs fitted soon  

[Tfsi_Mike]

Was pleased with my hp as I thought I would get 270hp but I got 279hp.
But there was a problem at 5100 revs when it dipped in power. Thanks goes to SteveP who logged it and it turned out to be a mis fire on cylender 3 , no other faults. It's in for a service on tuesday , so hopefully some new plugs will solve the problem .
Great day , thanks to everyone 

Drop a pm when you get diagnosed please bud, I had a nightmare with a misfire on cyl3 that turned out to be injector 3

[SteveP]

Good to see some old and new faces today  

Had a blast on the way down with Greeners, Hurdy, Stealth and Keith, but -11c in a car with very little interior isn't much fun though  

My result, 348.4bhp and just over 340ftlb

[Janner_Sy]

My result, 348.4bhp and just over 340ftlb

What was the highest Ko4 Stage 2+ of the day.  That's about 20hp upon the normal KO4 2+ jkm results  iirc.

Get your graphs up guys

[SteveP]

^^^ 328bhp IIRC was the highest K04 

[maxload]

Was pleased with my hp as I thought I would get 270hp but I got 279hp.
But there was a problem at 5100 revs when it dipped in power. Thanks goes to SteveP who logged it and it turned out to be a mis fire on cylender 3 , no other faults. It's in for a service on tuesday , so hopefully some new plugs will solve the problem .
Great day , thanks to everyone 

Drop a pm when you get diagnosed please bud, I had a nightmare with a misfire on cyl3 that turned out to be injector 3

No problem mate. I REALLY hope it is a small problem like the plugs and not an injector  

Its only got 22000 on the clock and is still running the original plugs so fingers crossed a new set will sort the problem...

[gazbutS3]

Good to see some old and new faces today  

Had a blast on the way down with Greeners, Hurdy, Stealth and Keith, but -11c in a car with very little interior isn't much fun though  

My result, 348.4bhp and just over 340ftlb

great figures on JKM's rollers 

[Janner_Sy]

Good to see some old and new faces today  :happy2:Had a blast on the way down with Greeners, Hurdy, Stealth and Keith, but -11c in a car with very little interior isn't much fun though   :laugh:My result, 348.4bhp and just over 340ftlb

great figures on JKM's rollers 

Definitely.  What did DanGB get on DD rollers.  Was a tad higher iirc but with wmi

[Janner_Sy]

How did the R-Tec cars do today did they manage their 330-360lbft or was itmuch less....

No excuses for the usual 'dyno reading low' at JKM today with stock cars making the correct stock figures (remember 200ps = 197hp)

[higher1]

I was there today didnt run my car but 2 or my friends did the silver anniversary and the blue mk4 really good day big thx to JKM!

[GarethB]

How did the R-Tec cars do today did they manage their 330-360lbft or was itmuch less....

No excuses for the usual 'dyno reading low' at JKM today with stock cars making the correct stock figures (remember 200ps = 197hp)

R-tec cars were down on the torque figures produced at R-tech, but the bhp was with 1-2 bhp.

Not sure about you're second comment Sy - at, for example an AmD RR day, they will start with a standard car and (everytime i've been to one) it has made standard power. Then the high powered figures are laughed at  

[Greeners]

Great day fella's! Big thanks to Robin for organising and keeping things in check! 

Didn't go on the dyno with the Pirelli but after the 'blast' down there this morning ( ) I'm confident everything is running as it should!

Great to see some old faces and good to meet the new ones! 

Harrods Shortbread FTMFW!!