Make a donation

Author Topic: pressure washerless foaming  (Read 2604 times)

Offline jimk04

  • Always Involved
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 15
  • Posts: 471
    • Email
pressure washerless foaming
« on: December 26, 2011, 08:33:57 am »
I need to kick into touch my car cleaning, especially as I have had my mk5 painted!. I see gilmour do a snowfoam bottle that just connects to a hose.
Has anyone tried one of them?
I am guessing they are quite reliant on decent mains water pressure?
Thanks

Milltek tbe, Forge intercooler, AMD map, Eibach Sportlines, Porsche 996 over AMG 330mm homegrown BBK

Offline andrewparker

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 78
  • Posts: 1770
Re: pressure washerless foaming
« Reply #1 on: December 26, 2011, 08:36:22 am »
I have one and it's pretty good, but as you say, you need an outside tap with very good pressure (mine is like a fire hose!), and it's quite sensitive to the products you use with it.

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: pressure washerless foaming
« Reply #2 on: December 26, 2011, 11:34:48 am »
Depends. If you have a pressure washer, I'd go for a foam lance. If you don't then a Gilmour will be okay. I was looking at buying one of these, then noticed Karcher did one for their foam lance. Bought that and wished I hadn't.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Re: pressure washerless foaming
« Reply #3 on: December 26, 2011, 01:01:28 pm »
Depends. If you have a pressure washer, I'd go for a foam lance.

+1 - You will get far better results with a foam lance , ok they will cost a little more but worth every penny  :happy2:

Offline andrewparker

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 78
  • Posts: 1770
Re: pressure washerless foaming
« Reply #4 on: December 26, 2011, 01:11:40 pm »
I'm sure the question implies he doesn't have a pressure washer...

Offline n_d_fox

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 4
  • Posts: 30
    • OCD.etail - Facebook Page
    • Email
Re: pressure washerless foaming
« Reply #5 on: December 26, 2011, 10:19:09 pm »
I'm sure the question implies he doesn't have a pressure washer...


Thats how i took it  :happy2:

Gilmour foam master II i think is the current model... should be ok on the hose if you dont have access to a dedicated lance on the jet wash.

The foam wont be a dense as you'd get with the jet wash / lance but it will be better than nothing. Getting a decent foam product and using on the fullest setting should do you fine.

Parting the rush hour traffic like a diesel powered Moses !
OCD.etail - http://www.facebook.com/pages/OCDetail/174298162661463

Offline graeme123

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 22
Re: pressure washerless foaming
« Reply #6 on: December 26, 2011, 10:43:55 pm »
For less than £100 you can get a decent pressure washer and foam lance, I would say that's your best bet

I have used the ones you attach to your hose and there just pointless

Offline jimk04

  • Always Involved
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 15
  • Posts: 471
    • Email
Re: pressure washerless foaming
« Reply #7 on: December 27, 2011, 10:57:00 am »
Thanks for the input chaps.

I do actually have a pressure washer - a cheap a nasty/cheerful 'Tooltec' that was bought in Netto!

It came with a detergent bottle that fits on the lance but doubt it will 'foam' up?

The reason I asked about none pressure washer snow foaming is that I'm not sure on the practicalities of me rigging up the washer every time I wash the cars...its a bit of a clat due to the proximity of sockets to where I do the washing...and I'm lazy to rig it all up.

Perhaps I ought to buy some foam and see if this cheapo machine can foam it up.

Milltek tbe, Forge intercooler, AMD map, Eibach Sportlines, Porsche 996 over AMG 330mm homegrown BBK

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: pressure washerless foaming
« Reply #8 on: December 27, 2011, 12:12:31 pm »
Might be worth getting a hose extension? My PW stays in the garage and I just take the lance around the car.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline smokey

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 5
  • Posts: 90
    • Club night in Bristol - Drama
    • Email
Re: pressure washerless foaming
« Reply #9 on: January 10, 2012, 11:46:21 am »
I agree using a presure washer and lance will give the best results.

I was able to get a Karcher pressure washer for £40 from the outlet store http://www.karcheroutlet.co.uk
They were really good, quick delivery and so far has been working great!!

2004 GT TDI 2.0 (140bhp) - Mods so far - GTI pedals, GTI Interior Metal Strips, GTI Metal Ashtray, Gear Knob with metal surround, TPMS (with switch), RNS-510, Skoda bluetooth kit, Armrest MDI, VCDS owner (Bristol)

Offline Greeners

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 201
  • -Receive: 199
  • Posts: 8812
    • Email
Re: pressure washerless foaming
« Reply #10 on: January 10, 2012, 12:01:38 pm »
Remember the longer the hose you use the less pressure you'll get at the snow foam end........