Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Front Bumper Inserts - How to remove?  (Read 4493 times)

Offline smokey

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 5
  • Posts: 90
    • Club night in Bristol - Drama
    • Email
Front Bumper Inserts - How to remove?
« on: February 10, 2012, 02:42:51 pm »
Hiya guys

I was wondering if you could help me?

I clipped my front bumper this morning, but "luckily" it was only on the bumper inserts (where the headlight washers would be, mine doesnt have any)

As its colour coded i need to remove it and spray it this weekend, as it loos quite bad.

Just wondering how you removed them?

Thanks
Logged

2004 GT TDI 2.0 (140bhp) - Mods so far - GTI pedals, GTI Interior Metal Strips, GTI Metal Ashtray, Gear Knob with metal surround, TPMS (with switch), RNS-510, Skoda bluetooth kit, Armrest MDI, VCDS owner (Bristol)

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: Front Bumper Inserts - How to remove?
« Reply #1 on: February 10, 2012, 03:37:46 pm »
You can pry them off from the front, one by one, with some form of trim remover. Take care not to slip and scratch the bumper if you use a screwdriver wrapped up etc.

Here's pics I put up previously, may help you see where the tabs are.



Logged
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline apples12

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 6
  • -Receive: 34
  • Posts: 563
Re: Front Bumper Inserts - How to remove?
« Reply #2 on: February 12, 2012, 08:43:18 am »
or you could remove the lower fog light grill and push out from the inside/carefully push the tabs out which you'll be able to feel from the inside...avoids you risking leaving screwdriver marks...
Logged
MK6 GT TDI  - CW - LUX pack
GONE
MkV Golf 1.9TDI Sport in DBP, 160,000 miles and climbing!

Retrofits by me:GT front end,OEM bixenons with auto-levelling/washers, Valeo LED Rears, MFSW + Highline SWCM, Cruise Control, 30byte Highline CECM, Highline clocks, Rain/Light Sensor, Auto-dimming Rear view Mirror, RNS-510 LED (Ver H; SW: 4020), Fiscon Basic Bluetooth, MDI + Aux, Armrest, Reverse Camera LOW, TPMS..what next...

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: Front Bumper Inserts - How to remove?
« Reply #3 on: February 12, 2012, 09:27:36 am »
Just noticed the bumper strips you have are different to what I posted a pic of.
Logged
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline smokey

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 5
  • Posts: 90
    • Club night in Bristol - Drama
    • Email
Re: Front Bumper Inserts - How to remove?
« Reply #4 on: February 12, 2012, 10:52:47 am »
The pictures you posted were a great help. I used a small flat head screwdriver and some rag wrapped around it. Started on the corner and it popped off easily  :happy2:
Logged

2004 GT TDI 2.0 (140bhp) - Mods so far - GTI pedals, GTI Interior Metal Strips, GTI Metal Ashtray, Gear Knob with metal surround, TPMS (with switch), RNS-510, Skoda bluetooth kit, Armrest MDI, VCDS owner (Bristol)
Pages: [1]   Go Up
« previous next »