All Things Mk5 > Performance Modifications
Comparison between GTI/S3/Cupra/TT mk2 front suspension parts
rex:
So, then the TT hub is slightly heavier than the S3 one, right?
Anyway... I will wait for you to install the TT hub and see what it implies (also read Alex's thread but waiting for another oppion). And than I will try to get my hands on a pair of TT hubs not because of the lightness but because of the increase in the Center of Roll.
danishmkvgti:
--- Quote from: rex on January 21, 2012, 11:47:12 am ---So, then the TT hub is slightly heavier than the S3 one, right?
Anyway... I will wait for you to install the TT hub and see what it implies (also read Alex's thread but waiting for another oppion). And than I will try to get my hands on a pair of TT hubs not because of the lightness but because of the increase in the Center of Roll.
--- End quote ---
As said my scale was not precise but i reckon that the S3 and TT hubs are very much the same weight Rex
danishmkvgti:
I would like to start with saying my skills in photo editing is limited :grin:
But here are my measurements of all three hubs, the lines are not straight, but the measurements are true :laugh: :P
I hope this helps in seeing the difference between the three hubs. I measured fron the lower shoulder that the damper will rest on and to the surfaces that the ball joint and tie rod end will touch on the hubs.
Now you should be able to see the numbers :smiley:
rex:
Jake, I think those are cm not mm.
danishmkvgti:
Dooh, i'll be back with a version 3 :grin:
There you go Rex :drinking:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version