Hidden trick to going low on static?

[SL03 JOE]

Hi there, I'm just wondering wether there is a way to go real low on a static drop that doesn't rub the front tyres out when turning?

I have the KW V3 set up and I'm wondering how I could adjust the front to stop rubbing some times and go lower and how to drop the back more?

Thanks, Joe.

[rich83]

You've got kw v3 and you want to go really low?? You bought the wrong coilovers.

[SL03 JOE]

You've got kw v3 and you want to go really low?? You bought the wrong coilovers.

I'm looking to go lower but not silly low!

I know the KW V3 do go pretty low, but on lowest they can rub on when turning under power. I've been thinking front camber to hopefully stop this?

Joe.

[brady88]

Rolled arches...but would cost a bomb!

Camber and some extremely stretched tyres 

[SL03 JOE]

Rolled arches...but would cost a bomb!

Camber and some extremely stretched tyres 

well rears are factory rolled and been quoted £100 for front from www.archenemy.co.uk and they come out to you and do it all for the same price.

Joe.

[brady88]

Rolled arches...but would cost a bomb!

Camber and some extremely stretched tyres 

well rears are factory rolled and been quoted £100 for front from www.archenemy.co.uk and they come out to you and do it all for the same price.

Joe.

£100 seems a very reasonable price...well worth it 
But if the paint cracks, which it normally does, then it's a re-spray on both wings 

[Top Cat]

There is nothing to roll on the front arches, about 2 or 3 mil. 

[E30Dom]

Have you done the arch liner screw mod? Mine never rubbed on my r32 and it was very low

[big al]

Be careful rolling the front arches as the roller can pull the metal and spoil the line where the front panel meets the front door.
Speak to Greg Howells, he charges £60 per arch and rolls it without using an arch roller. Though as said you will probably have to spray the panels again.

Failing that there are H&R ultralows that Si Sweetland sells, wider arches and stretched tyres to prevent rubbing,

[SL03 JOE]

yeah well i think im going to be flaring all the archs soon and do it properly and get spaces to make it sit right.

but can't decide between Rotiform Nue or 3SDM 


joe.