milltek exhaust

[dan930]

was wondering if the milltek system is loud as I don't want a loud exhaust,just a tiny bit louder then the oem edition30 exhaust is ok...will be connecting it to a milltek sportscat&downpipe...

[xht20]

Get the resonated catback and you will be satisfied 

[Carrera2RS]

Hi

I found the resonated a little too quiet and changed to the non resonated. If you find a little resonance inside the cabin you can add insulation in the boot.

[maxload]

I have a miltek non res and it is prefect.
It's just a little more throaty than the oem zorst but not too over loud. The latest edition miltek has ajustable tips as well so you can set it up exactly as you like 


 

[dan930]

I have a miltek non res and it is prefect.
It's just a little more throaty than the oem zorst but not too over loud. The latest edition miltek has ajustable tips as well so you can set it up exactly as you like 


 

went on the milltek website but it doesn't mention it

[Tfsi_Mike]

I have a miltek non res and it is prefect.
It's just a little more throaty than the oem zorst but not too over loud. The latest edition miltek has ajustable tips as well so you can set it up exactly as you like 


 

I have full miltek non res and it sounds ace! Not too loud.  Only loud ('too loud') when rear seats are folded down and parcel shelf out together.

When on boost from the outside it sounds evil

[maxload]

went on the milltek website but it doesn't mention it

If you look at this pic you can see the clamps to enable you to adjust it. At this stage I hadnt adjusted it so the clamps are visible. If you push the tips in flush with the rear valance you cant see them , which is a nice touch



Another pic just for the sake of it

[GNJ_Motorsport]

I have the non resonated system on my S3 and I love it. Not too loud really when driving normally but it sounds so good from outside when you give it some