BSH / Forge Catch can - oil consumption

[Tfsi_Mike]

Have done a search, Im wanting to see the varying levels of increased oil consumption people suffer after fitting BSH or Forge catch can systems.

Thanks in advance 

[Cupra R]

Can't say I have noticed an increase in Oil Consumption Mike. I have the Forge unit fitted.

I assume if you have a can fitted a bit gets caught, if you have no can, it's burnt off.

[Tfsi_Mike]

Can't say I have noticed an increase in Oil Consumption Mike. I have the Forge unit fitted.

I assume if you have a can fitted a bit gets caught, if you have no can, it's burnt off.

How long have you had it fitted mate?

[RedRobin]

.
I haven't noticed any significant change either way in oil consumption since fitting the BSH and then Forge catch can. Doesn't oil consumption get influenced by type of journeys and mileage?

[Cupra R]

Can't say I have noticed an increase in Oil Consumption Mike. I have the Forge unit fitted.

I assume if you have a can fitted a bit gets caught, if you have no can, it's burnt off.

How long have you had it fitted mate?

Had the Forge unit about 12months mate and before that a BSH can for about 6months.

[gazbutS3]

Had the BSH catch can for 15K now, no change in oil consumption

[Teutonic_Tamer]

Can't say I have noticed an increase in Oil Consumption Mike. I have the Forge unit fitted.

I assume if you have a can fitted a bit gets caught, if you have no can, it's burnt off.

Nope, it is returned to the sump.

[Cupra R]

Ah. Thanks for clearing that up.

[Teutonic_Tamer]

The only time the oil doesn't get returned to the sump is when under full throttle or very high engine loading - then it can build up in the PCV, and basically this is normally the only time they'll burn oil.