General > Product Reviews
Porsche 996TT brake kit - The Not Quite So Big brake Kits Bigger HARDER brother!
Janner_Sy:
Question from a friend.
Does this kit HAVE TO use Merc 350mm discs, or can it be used on an R32 345mm disc? He has new discs on his car and is after a bolt on caliper/carrier setup that doesnt nvolve him buying new discs.
vRSAlex:
Some db9 calipers with some brackets Dave does will fit over the 345's. Same as my R8 setup was.
I have db9 calipers on the shelf too!
DaveB@Vagbremtechnic:
And r8 rears can fit over r32 discs, just pretty much a 12mm spacer required on a 7.5" wheel
billman:
I have a bbk my self from daveb bought from him at 2009. Awesome kit. The only problem was with the discs. The hub centre of the discs he had sent me was wrong and I was forced to make them 2 piece with aluminum centre bell which of course wasn't cheap.
berg:
Just a heads up on this kit re clearance/spacers.
When I bought from Mike I was under impression would fit with BBS VZ without a spacer.
The kit would not but I think this was because have TT wishbones kitted and the extra poke required 3mm spacer.
Unfortunately, i now need arch work/arches rolling slightly as it has rubbed quite badly a couple of times and you can see where is cutting into the tyre wall. On inspection of my arch it has taken a bit of paint off it so wing will need re-spraying I presume after the work :scared: not good really.
The kit looks immense under the wheels and performs very well but probably would have stuck with NQSBBK if new I was going to have these issues
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version