GTi side skirts

[AdeMcG]

Cool ! take some pics of the fit please as im getting some for mine . are you just using the fixing screws at each end then bonding the skirt to the sill?

Full install type work through !

http://uk-mkivs.net/forums/t/53368.aspx

[lukejenks101]

Does anyone know how much it is for the primed ones now? If they aren't too dear it would save the hassle of flat ting back the dimpled ones

[Starshaped]

They used to be cheap but after a while vw cotton on to the fact and whack the price up,they were over £100 a side last time ichecked and that was a few years ago.

[vRS_Pagey]

£224 + VAT when I last got a quote......

Does anyone know how much it is for the primed ones now? If they aren't too dear it would save the hassle of flat ting back the dimpled ones

I doesn't take much if you have a random orbit sander, then £6.49 for a can of plastic primer, saves ££££'s.  Mine are finished but I can't post any pictures until the 20th as I've exceeded my bandwidth on photobucket........

[Little_Dave]

£224 + VAT when I last got a quote......

Does anyone know how much it is for the primed ones now? If they aren't too dear it would save the hassle of flat ting back the dimpled ones

I doesn't take much if you have a random orbit sander, then £6.49 for a can of plastic primer, saves ££££'s.  Mine are finished but I can't post any pictures until the 20th as I've exceeded my bandwidth on photobucket........

Do they fit ok? See you was worried about them being from my 3 door and yours is a 5  Got them ready to paint or all sprayed up and ready to fit now? 

Dave

[vRS_Pagey]

£224 + VAT when I last got a quote......

Does anyone know how much it is for the primed ones now? If they aren't too dear it would save the hassle of flat ting back the dimpled ones

I doesn't take much if you have a random orbit sander, then £6.49 for a can of plastic primer, saves ££££'s.  Mine are finished but I can't post any pictures until the 20th as I've exceeded my bandwidth on photobucket........

Do they fit ok? See you was worried about them being from my 3 door and yours is a 5   Got them ready to paint or all sprayed up and ready to fit now?  

Dave

All finished buddy, I'm 90% sure they will be okay, the only concern I have is the fin part sits away from the body when the ends are secured, I just hope the tape I've fitted will be strong enough.  Once my usage resets on Photobucket, I will update my build thread.

On another subject the spoiler insert is on, I did need all the z clips to fit.  

[Little_Dave]

£224 + VAT when I last got a quote......

Does anyone know how much it is for the primed ones now? If they aren't too dear it would save the hassle of flat ting back the dimpled ones

I doesn't take much if you have a random orbit sander, then £6.49 for a can of plastic primer, saves ££££'s.  Mine are finished but I can't post any pictures until the 20th as I've exceeded my bandwidth on photobucket........

Do they fit ok? See you was worried about them being from my 3 door and yours is a 5   Got them ready to paint or all sprayed up and ready to fit now?  

Dave

All finished buddy, I'm 90% sure they will be okay, the only concern I have is the fin part sits away from the body when the ends are secured, I just hope the tape I've fitted will be strong enough.  Once my usage resets on Photobucket, I will update my build thread.  On another subject the spoiler insert is on, I did need all the z clips to fit.

Yeah was the same when i fitted my new ones but so far so good with the tape holding fine a week later  as far as i could see when re fitting as long as the ends line up ok and secure ok underneath its just a case of whether the fin will clear your rear doors i guess 

Good job i bunged all the clips in the envelope then 

Dave