A how to guide for removing the light switch panel please?

[golfman]

Hi all im looking for a how to guide for removing the light switch panel
as you know i have xenons so i cant use the adjust button for the lights to go up and down now so i have a new switch with just the dimming function,but i need to know how to get the panel off to fit the new switch

can anyone help

cheers

scott

[vRStu]

Remove the end panel, remove the light switch (from the off position push in the knob and turn it whilst pulling the switch out), remove the drop down storage tray and remove the trim over the top of the steering column (lower and extend the steering column reach/rake and pull the trim towards you)

This should reveal all the screws you need to remove.  There are a couple under the lower edge too.

[mortygttdi]

I was gonna ask you if you wanted one Scott just ordered mine will be here Tue,  I also ordered a new front level sensor and some other stuff thats another £100 down the pan

Darren

[golfman]

Remove the end panel, remove the light switch (from the off position push in the knob and turn it whilst pulling the switch out), remove the drop down storage tray and remove the trim over the top of the steering column (lower and extend the steering column reach/rake and pull the trim towards you)

This should reveal all the screws you need to remove.  There are a couple under the lower edge too.

Thanks for that stu
will give it a go this afternoon(but if all else fails Darren i have another job for you ) 
i take it you dont have to have the battery off for this?

cheers

scott

[golfman]

I was gonna ask you if you wanted one Scott just ordered mine will be here Tue,  I also ordered a new front level sensor and some other stuff thats another £100 down the pan

Darren

i was gonna ask you the same darren 
just keep spending it's only money mate

scott

[vRStu]

If you get stuck Scott, get back on here or phone me before you break anything 

[golfman]

If you get stuck Scott, get back on here or phone me before you break anything 

Thanks for the help stu new part all fitted and looking good
(And i never broke anything  ) TBH a piece of phiss
darren if you need any help with fitting this part just give me a shout mate 

scott

[vRStu]

Good to hear mate.

[mortygttdi]

Ive just failed trying to replace some pads on my mates R32,  undone the caliper guide bolts to get the pins out and the caliper wouldn't budge So put it back together, If he would have come round at like 9-10 this morning instead of nearly 4pm then I would have had a better go at it

Any way got Ollies coilovers to do in the morning then a nice free week

Cheers

Darren