All Things Mk5 > How to Guides / Troubleshooting

boost issues with forge dv

<< < (4/11) > >>

joesgti:
also steve, have you put the old DV back on to see if you notice a difference?  :smiley:

SteveS:
i have spoken with forge and they are sending me out the nipple.
however they say it only servers to OPEN the DV not keep it shut, so its unlikly to be my issue.
Its strange, with the standard one, if i floored it in second, i would have loads of wheel spin when boost kicked in.
however with the forge, i dont get any and it feels like there is not "woosh" of boost..

I havnt installed the original because its such an effort.

john_o:
def sounds like you have pipes on wrong or the valve itself is not sealing Steve.
I assume you have actually fitted the solenoid part and the extend wires to it?

SteveS:
its all exactly as the manual.  :confused:

john_o:
take it off then and check the piston is able to move up and down ok...?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version