Make a donation

Author Topic: cambelt change question  (Read 1122 times)

Offline gti mor door

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 4
    • Email
cambelt change question
« on: March 08, 2012, 09:44:51 am »
hi people im just after some advise on the cambelt change on my golf i have bought the vw workshop manual for the step by step guide but i cant see if i need a cam locking tool do i require 1?? because it dosent mention anything about 1.

Cheers!
 :smiley:

Offline apples12

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 6
  • -Receive: 34
  • Posts: 563
Re: cambelt change question
« Reply #1 on: March 08, 2012, 12:17:47 pm »
if your changing the cambelt i would've thought you absolutely would have required a cambelt locking tool...

the vw workshop manual may not have explicitly mentioned 'cambelt locking tool' but will most likely have mentioned a VW specific tool which is in actual fact a vw locking tool

have a look over on www.tdiclub.com, or www.mkvgolf.com forums, plenty of the americans tend to do the cam belt jobs themselves and have posted very good diy's

good luck!
MK6 GT TDI  - CW - LUX pack
GONE
MkV Golf 1.9TDI Sport in DBP, 160,000 miles and climbing!

Retrofits by me:GT front end,OEM bixenons with auto-levelling/washers, Valeo LED Rears, MFSW + Highline SWCM, Cruise Control, 30byte Highline CECM, Highline clocks, Rain/Light Sensor, Auto-dimming Rear view Mirror, RNS-510 LED (Ver H; SW: 4020), Fiscon Basic Bluetooth, MDI + Aux, Armrest, Reverse Camera LOW, TPMS..what next...