James GTI Ko4 2.0tfsi 401bhp - launch control?

[rtechniki]

would be nice to really see what happens if the wastegaste dont blow open,   

[james]

buy me one and we will test befor i go ;)

[GrayMK5GTI]

buy me one and we will test befor i go ;)

Is that go 2.5 TT engine? 

Or go somewhere else 

[h4rdy]

After a quick search Hurdy seemed to get good results from the forge? On his ed30.

Ill have a chat with Alex later if I remember.

[vag12]

yep, the s3 g247 made my engine run lean.

It is do with the voltage they signal on,  bwa has one point and it seems the s3 has to points.


Tips.
Just change it on your drive! only took me 1.5 days on my own, really easily job 

Where is this sensor located and do you have a part number for it?

[vRSAlex]

Your old piston and the bits that fell off it:





First time ive seen this happen!

[GarethB]

blimey 

[rich83]

 

[james]

looks just run in to me   

crazy the rods did not bend.

is everything else ok inside?

[Hurdy]

After a quick search Hurdy seemed to get good results from the forge? On his ed30.

It was an arse to fit and set-up like Steve jr says, but gave decent results. I don't know if I'd bother again though for the small benefit v's hassle.

[Poverty]

Your old piston and the bits that fell off it:





First time ive seen this happen!

Only time ive ever seen something like that is from a pic tim at race developments posted. Someone put diesel into their petrol engine and that was the end result! 

[DanGB]

Snap...

Apparently mine was still making 400hp before they took it apart...

[rtechniki]

Both BWA? both 400bhp?

Which cylinder did your piston break up on Dan?

Nick

[james]

it was the same as mine, just noticed this post.

[MightyMullet]

Just read all this and its safe to say you are nuts mate, absolutely crazy build, didnt think these engines would cope with anywhere near that much power, impressive stuff.
Need to see where this is going,
Would have to be crazier than you not to sub to this