APR Stage 1 >>>

[CupraKris]

Well to be honest I haven't tried it but Greg did say that on my ecu I would only be able to switch between stock and map.
Also on my manual it says
Seat Leon Euro my2009 2.0t fsi stages 1/2 v3.1 testpipes (single program)
Mode 1 98 ron octane chipped program

Kev I think its just the V3.1 software that doesn't yet have all modes for the Stage 1, the V3.0 does but we are running the slightly newer software in the TFSI. Stage 2 has all modes.

[CupraKris]

Just been reading the instructions to change to stock mode and it seems very complex just to change maps  have you got a security code for yours?

[Marshall]

Don't have any codes and can't get it to work


Sent from my iPhone

[Tfsi_Mike]

Just been reading the instructions to change to stock mode and it seems very complex just to change maps  have you got a security code for yours?

It tried explaining it by text and it sounded nails.

Actually doing it is super simple

[Marshall]

I've followed the instructions over and over again and nothing happens.
Looks like this map cannot be switched to stock unless I'm being very stupid


Sent from my iPhone

[Marshall]

Well spoke to Greg and stage 1 version 3.1 doesn't have the switch to stock function hence why I couldn't get it to work.
Only stage 2 and 2+ has that function.
That clears that up then.
I was just curious as let's face it once mapped would you want to go back standard?

Sent from my iPhone

[Tfsi_Mike]

Well spoke to Greg and stage 1 version 3.1 doesn't have the switch to stock function hence why I couldn't get it to work.
Only stage 2 and 2+ has that function.
That clears that up then.
I was just curious as let's face it once mapped would you want to go back standard?

Sent from my iPhone

If your wife's driving. Yes 

[john_o]

it is also useful to run in stock to diagnose issues / had to fill with poor quality fuel etc

[Marshall]

Don't get me wrong it would be better for dealer visits


Sent from my iPhone

[ukdub]

If all the old APR threads where still here, you could have used the search facility 

[Joemk5]

I have an apr stage 1 with 95 98 and stock maps but the 95 map seems quicker than 98?
Is there a chance the maps are installed the wrong way round I would expect the 98 map to have slightly more timing and there's no way to know which map you have selected when doing it on the cruise stalk

[vRS Carl]

Normally the flash of the CEL tells you which mode you are in. When i had APR it was as follows

1 Flash - Stock
2 Flash - 95 Ron
3 Flash - 98 Ron

[StephenED30]

Programming details are on their web site. 

http://www.goapr.co.uk/support/emcs/mk4-on-off.php

http://www.goapr.co.uk/support/emcs/mk4-on-off-res.php

[Janner_Sy]

Normally the flash of the CEL tells you which mode you are in. When i had APR it was as follows

1 Flash - Stock
2 Flash - 95 Ron
3 Flash - 98 Ron

But if they had flash 2 as the 98 ron and flash 3 as the 95 then he could be in the wrong map.

FWIW when i was runing the BETA maps my performance maps were in reverse order ie 100 RON first to 95 Ron last

[vRS Carl]

Normally the flash of the CEL tells you which mode you are in. When i had APR it was as follows

1 Flash - Stock
2 Flash - 95 Ron
3 Flash - 98 Ron

But if they had flash 2 as the 98 ron and flash 3 as the 95 then he could be in the wrong map.

FWIW when i was runing the BETA maps my performance maps were in reverse order ie 100 RON first to 95 Ron last

You can ask for them to program it how you like. I was asked what order i wanted when Greg did it for me so i just asked for it in order.