R32 Refurb inc new seals ??

[jon-tfsi]

Do you know of anywhere that does a full refurb inc seals for R32 Calipers?

 

[big al]

Dave B?

[jon-tfsi]

He's a busy man

Any one else?

[DaveB@Vagbremtechnic]

Where are you in the world Jon?

If you were local I could do the seals whist you wait, wouldn't charge you anything either

[Deako]

Are you desperate for them? Would the best bet to ask Dave to prep a set then part exchange your set that hasn't been refurbished?

[jon-tfsi]

Sounds like good advice !

Dave the reverse psychology never fails     just kidding !!

Sorry for the slow response on this one.
My partner gave birth to our first child at 12.30 this morning so its been a bit of an overwhelming weekend 

I noticed in your advert for the S3 rears that the turnaround for them would be 6 weeks so i didnt want to put another job onto you that was never going to give any real financial gain.
Im in Guisborough, North East and have a feeling that your quite a distance from me.

[Andy]

Congratulations jon,am going to the awesome meet this month if that's any help to you

[jon-tfsi]

Cheers mate  You get to Awesome quite regularly! A trip there is never cheap either 

[DaveB@Vagbremtechnic]

I have got a lot on pal but to reseal some r32 piston housings would take me 4 mins and that includes polishing the pistons, got all the kit here. So it'd be just a case of catching me in.

I'm in Preston Lancs.

Bout 1:30 away

And congrats you have a window of about 4 days until your life will change forever.....spend them wisely!

[jon-tfsi]

And congrats you have a window of about 4 days until your life will change forever.....spend them wisely!

Like browsing the forum?  . . . . No? Lol

I have had far too much time on my hands for a few years now. I feel I am in for a shock to the system 

[jon-tfsi]

Cheers for offering Dave, very generous. Having looked at the routeplanner its probably a bit further than i would like to be travelling at the moment.

If i could get hold of a seal kit i could do them myself. Is there a good place to source the seal kits from? Also are the rubber guide bushes and bleed nipples easy to get hold of?