Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Near Side Outer CV Boot Replacement  (Read 3003 times)

Offline ianv5

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 12
  • Posts: 437
Near Side Outer CV Boot Replacement
« on: March 08, 2012, 12:36:23 pm »
As above is it a job I could do myself or does it need to be done at a garage?
Logged

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Near Side Outer CV Boot Replacement
« Reply #1 on: March 09, 2012, 07:13:49 am »
As long as you have the correct tools and a vice then you should be able to do it.

You really need an impact gun, multi spline sockets, cv clip tool and a big copper hammer.
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline s2martyn

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 72
Re: Near Side Outer CV Boot Replacement
« Reply #2 on: March 10, 2012, 08:45:08 pm »
no,no,no..the shaft doesnt need removing from the car,easyly done with the right tools(if your a technician)
Logged

Offline ianv5

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 12
  • Posts: 437
Re: Near Side Outer CV Boot Replacement
« Reply #3 on: March 12, 2012, 12:37:59 pm »
So what tools will I need?

I had the front wheel off yesterday and from my understanding I need to remove brake caliper and front disc to get at the outer CV boot?

Anything else?
Logged

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Near Side Outer CV Boot Replacement
« Reply #4 on: March 12, 2012, 12:56:33 pm »
Despite contrary advice above when I did one I removed the driveshaft.  Not much extra work and much easier to do on the bench etc.

Getting the CV joint off was quite hard but a Master Tech gave me the advice of using a driveshaft bolt driven right down the centre, preferably with a windy gun (which I guess makes it easier if you leave the shaft on the car) to push the CV joint off.
Logged
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Saintsteve

  • Guest
Re: Near Side Outer CV Boot Replacement
« Reply #5 on: March 12, 2012, 02:29:33 pm »
Quote from: vRStu on March 12, 2012, 12:56:33 pm
Despite contrary advice above when I did one I removed the driveshaft.  Not much extra work and much easier to do on the bench etc.

Getting the CV joint off was quite hard but a Master Tech gave me the advice of using a driveshaft bolt driven right down the centre, preferably with a windy gun (which I guess makes it easier if you leave the shaft on the car) to push the CV joint off.

Oh yeah.. Good luck  :signLOL:
Logged
Pages: [1]   Go Up
« previous next »