Make a donation

Author Topic: Cam follower info  (Read 9249 times)

Offline deano65

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 55
    • Email
Cam follower info
« on: March 19, 2012, 09:33:54 am »
Hi everyone

can anyone give me some info on this Cam follower problem that could arise, and roughly what needs to be done and how much, my Gti has 85,000 miles on it although running great at the mo...

Cheers Dean

Offline reflex11

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 7
  • Posts: 275
    • Email
Re: Cam follower info
« Reply #1 on: March 19, 2012, 09:45:22 am »
with 85k on the clock I would definatly replace it
with mileage the cam follower wears and if its worn alot it can break and cause havoc on other components like camshaft and fuel pump resulting in loads of money
cam follower costs £30 and seal costs £10 from your local stealer

sometimes there is no symptoms and it could be very worn

if there is it's usually fuel cuts and you might also throw a CEL
« Last Edit: March 19, 2012, 09:53:44 am by reflex11 »

Offline Tinytim

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 240
    • Email
Re: Cam follower info
« Reply #2 on: March 19, 2012, 10:37:54 am »
What is VW's service recommendation on this? Is it supposed to be replaced.

Offline deano65

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 55
    • Email
Re: Cam follower info
« Reply #3 on: March 19, 2012, 11:45:40 am »
Is it hard to replace then ??

thanks

Offline reflex11

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 7
  • Posts: 275
    • Email
Re: Cam follower info
« Reply #4 on: March 19, 2012, 12:01:44 pm »
it's not hard.. but just don't rush the job

you need to take the engine cover off
take fuse 27 out blue 15 amp until car cuts off
take high pressure fuel pump off
replace camfollower and refit..

its much more than that but thats just the basics of what you do

Offline nezquick

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 7
  • -Receive: 33
  • Posts: 789
Re: Cam follower info
« Reply #5 on: March 19, 2012, 12:12:00 pm »
A QUALITY  DIY that I intend to use to do mine

http://www.golfmkv.com/forums/showthread.php?t=102858

Offline Boothy

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 24
  • -Receive: 32
  • Posts: 951
  • All donations accepted, thanks.
Re: Cam follower info
« Reply #6 on: March 19, 2012, 12:44:53 pm »
Have a search on here bud. There's a good guide on here somewhere on how to check/replace it.

Offline reflex11

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 7
  • Posts: 275
    • Email
Re: Cam follower info
« Reply #7 on: March 19, 2012, 01:05:53 pm »
I was going to do a guide but I hvn't had time to do a write up

Offline deano65

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 55
    • Email
Re: Cam follower info
« Reply #8 on: March 19, 2012, 01:13:28 pm »
Thanks everyone

is there anything else i should change as a precaution by the way.. :scared:

Offline reflex11

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 7
  • Posts: 275
    • Email
Re: Cam follower info
« Reply #9 on: March 19, 2012, 01:24:00 pm »
the dealer told me to change the O ring seal on the HPFP but I don't think you really have to do it unless it's in a state

Offline deano65

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 55
    • Email
Re: Cam follower info
« Reply #10 on: March 19, 2012, 01:30:18 pm »
Yeah i have ordered the seal as well. What i meant was these valves that sometimes wear is it DV or something and is there any other components i should replace with it having 85000 miles on it ,just want to get this car back shipshape.. :laugh:

Offline nezquick

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 7
  • -Receive: 33
  • Posts: 789
Re: Cam follower info
« Reply #11 on: March 19, 2012, 02:28:35 pm »
If you want to go all out then Change your spark plugs, Diverter valve for a revision D, oil, oil filter, coolant, brake and clutch fluid. Essentially a major service if you have the time and money and want to do it all yourself. Although most of that depends on when you last did it.

Offline deano65

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 55
    • Email
Re: Cam follower info
« Reply #12 on: March 19, 2012, 03:26:22 pm »
Ok Bud  :happy2:

Offline Mk5 GTian

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 37
  • Posts: 1374
  • Wolfsburg - Probably the Best Cars in the World
Re: Cam follower info
« Reply #13 on: March 20, 2012, 05:06:35 am »

Deano,

I had a major service last month, and with a similar mileage to yours I got it changed. I had an oil change, engine flush, new filters, full inspection and fitting of a new cam follower and seal  for 220 quid from my specialist Duncans in Byfleet, Surrey. They gave me the old one, and said the top was quite a bit thinner than that of the replacement, so it was a really good decision to get it done.

Worth doing for peace of mind  :happy2:


Fun Golf: 2016 mk7 R DSG 3 door. Work Golf: 2015 mk7 1.4 TSI GT ACT 5 door.
Gone but not forgotten : mk2 Golf GTI 16v, mk4 Golf V6 4Motion, mk5 GTI Storm Developments Stage 1, mk5 GTI Revo Stage 1, BMW 330ci, Skoda Octavia VRS Revo Stage 2, BMW Z4 Sdrive35i.

Offline vRS Carl

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 282
  • -Receive: 240
  • Posts: 3088
  • I'm the F.A.G (Forum Apple Guru)
Re: Cam follower info
« Reply #14 on: March 20, 2012, 07:00:58 am »
Have a search on here bud. There's a good guide on here somewhere on how to check/replace it.

 :happy2:

Here you go.

http://www.mk5golfgti.co.uk/forum/index.php/topic,8339.0.html