Make a donation

Author Topic: getting rid of tar  (Read 1020 times)

Offline MrP

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 74
    • Email
getting rid of tar
« on: March 26, 2012, 10:44:52 am »
i've given the golf a clean over the weekend, and noticed that its covered in tar everywhere.

i've got some autoglym tar remover, and some other tar remover on the way, but i dont know whats the best way to use it when there's that much on the car.

do i just cover the entire car with the tar remover, or do i have to work on individual spots?

also, do i put the tar remover on when the cars wet or dry?

was also thinking of putting some ironx on it to get rid of any iron deposits as well.

at a guess, the procedure should be wash, dry, tar remover, wash, dry, ironx, wash, dry.

thanks

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7835
  • ED30 No.1412
    • Email
Re: getting rid of tar
« Reply #1 on: March 26, 2012, 12:05:02 pm »
I prefer to spray tardis straight onto the paintwork. Any leftover spots can be tackled with tardis on a microfibre.

I also wouldn't dry after washing post-iron-x. Leave the car wet and clay it. Then wash and dry before polishing/sealing.

Remember, tardis will strip any wax or sealant on the car too.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline MrP

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 74
    • Email
Re: getting rid of tar
« Reply #2 on: March 26, 2012, 12:44:29 pm »
i dont mind it stripping protection off, i think the garage put lifeshine or something on before i bought it, so i want that off and some decent wax on.

so does tardis have to go on dry?