Make a donation

Author Topic: If i was to get these moulded  (Read 4442 times)

Offline plush-automotive

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 4
  • Posts: 419
    • Email
If i was to get these moulded
« on: June 19, 2009, 09:08:45 am »
Just out of curiosty really if i was to get these molded so reproduction would be easier would anyone be interested at all for a simple solution to upgrade there audio and still keeping 90% of there boot practical.

Obviously i'm not sure on cost but i'd keep it as low as possible, ust wondered what peoples thoughts were really wheather something like this would appeal to alot of people or not.

Any input welcome i know cost will be a big issue like it is with anything.

I just need to make the desicion soon before i trim mine up really.

Ignor the middle panel i would just be doing the profiled sub box and the profiled amp rack, sorry about the bobbins photography lol.








Offline Hurdy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 137
  • Posts: 7683
Re: If i was to get these moulded
« Reply #1 on: June 19, 2009, 11:34:38 am »
That is coming on a treat :happy2:

I'm sure you'll get some interest from those who haven't done it yet. 8)
Golf R gone.

Ifti

  • Guest
Re: If i was to get these moulded
« Reply #2 on: June 19, 2009, 11:51:43 am »
Will look really nice when finished up. I'd love to have one, but with 2 young children, I really need by boot space for the pushchair etc!

Offline Andy

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 443
  • Posts: 10931
    • Email
Re: If i was to get these moulded
« Reply #3 on: June 19, 2009, 12:12:26 pm »
i might be interested but i have 2 amps - would the box for the sub woofer suit all...

Offline plush-automotive

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 4
  • Posts: 419
    • Email
Re: If i was to get these moulded
« Reply #4 on: June 19, 2009, 01:05:18 pm »
i might be interested but i have 2 amps - would the box for the sub woofer suit all...

The sub box is for a 10" i could make it in such a way i could spin the baffle off to suit the sub. most common 10" subs would work in around a cubic ft box so it would work with most, It was just an idea i was bouncing off people it may take a little development.

I usually build things specifically for the equipment and sub/amp etc but thought this may be an easy solution for a quick setup for people.

Cheers
luke

Offline Jaywoo-GTI

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 38
  • -Receive: 34
  • Posts: 1050
Re: If i was to get these moulded
« Reply #5 on: June 19, 2009, 01:23:25 pm »
I may be interested.

Offline Alexander

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 0
  • Posts: 269
Re: If i was to get these moulded
« Reply #6 on: June 19, 2009, 04:00:17 pm »
im interested depending on price! :happy2:
2005 Black Audi A3 Sportback TDI-Bose and Full Leather
2005 Black 3Dr GTI-Leather and Upgraded Sound System-Gone

Offline CocoPops

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 11
  • Posts: 596
    • Kennet Heath
    • Email
Re: If i was to get these moulded
« Reply #7 on: June 19, 2009, 04:01:31 pm »
I'd be interested in a 10" enclosure depending on price.
Used to Own: 2008 GTI Ed30 | ITG Intake | Miltek TBE System | Bluefin Stage 2 | 327bhp
On Order: 2017 Golf GTI Performance Pack 5dr DSG
Also own: 2016 Lotus Evora 400

Offline Andy

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 443
  • Posts: 10931
    • Email
Re: If i was to get these moulded
« Reply #8 on: June 19, 2009, 06:22:15 pm »
mine is a 12" sub-this is the lay out at the mo





Offline MickMc

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 151
Re: If i was to get these moulded
« Reply #9 on: June 19, 2009, 08:49:38 pm »
Defo interested depending on price  :happy2:

Offline CocoPops

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 11
  • Posts: 596
    • Kennet Heath
    • Email
Re: If i was to get these moulded
« Reply #10 on: June 25, 2009, 11:39:23 am »
Any news on the sub enclosure?
Used to Own: 2008 GTI Ed30 | ITG Intake | Miltek TBE System | Bluefin Stage 2 | 327bhp
On Order: 2017 Golf GTI Performance Pack 5dr DSG
Also own: 2016 Lotus Evora 400

Offline plush-automotive

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 4
  • Posts: 419
    • Email
Re: If i was to get these moulded
« Reply #11 on: June 25, 2009, 01:08:49 pm »
Not at the minute, i havn't had time to breath lately, if you are in desperate need for one i could build you another one off like mine no problems.

As soon as i have 5 minutes i'll sit down with my mould maker and get the ball rolling but i would of said it'd of took a couple of months to get the mould perfect ad get them inot production etc.

Cheers
Luke

Offline VC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 80
  • -Receive: 93
  • Posts: 4359
    • Very Cherry Stickers and Decals
Re: If i was to get these moulded
« Reply #12 on: June 26, 2009, 12:58:22 am »
your only real competition would be from stealthbox

and their stuff is good, but hyped and mostly poorly produced and too expensive

when i was hunting for a solution i discovered quite quickly that unless you buy JL with suited enclosure then it was pretty much stealthbox or nothing for the UK market

<<---- if you peek at 'my ride' thread and look at mine (built for a 13.5" sub) i got that done and finished for £200 (just the enclosure) and i paid for materials

sounds cheap but thats only because i had other stuff done so when totalled it worked out better than done individually and cheaper than stealhbox too

i'm waffling i know, but personally i think if you offer it with size to suit (8/10/12/13.5 etc) and done acurately for volume then you could be onto a genuine money spinner

as long as you make sure you dont foul the parcel shelf - worth noting here that the ball on the parcel shelf string when the boot is shut acts like a wrecking ball if the sub is not protected, i tuck mine into the net on the underside of the shelf but will be retro fitting MK4 golf retractable strings to solve it.

and that the boot carpet can still be lifted if needed too

long story short, offer the sizes, carpeted, with photo fit instructions and you will rule ebay buddy  :happy2:

should have just said that from the start  :grin:

Offline plush-automotive

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 4
  • Posts: 419
    • Email
Re: If i was to get these moulded
« Reply #13 on: June 26, 2009, 09:53:35 am »
your only real competition would be from stealthbox

and their stuff is good, but hyped and mostly poorly produced and too expensive

when i was hunting for a solution i discovered quite quickly that unless you buy JL with suited enclosure then it was pretty much stealthbox or nothing for the UK market

<<---- if you peek at 'my ride' thread and look at mine (built for a 13.5" sub) i got that done and finished for £200 (just the enclosure) and i paid for materials

sounds cheap but thats only because i had other stuff done so when totalled it worked out better than done individually and cheaper than stealhbox too

i'm waffling i know, but personally i think if you offer it with size to suit (8/10/12/13.5 etc) and done acurately for volume then you could be onto a genuine money spinner

as long as you make sure you dont foul the parcel shelf - worth noting here that the ball on the parcel shelf string when the boot is shut acts like a wrecking ball if the sub is not protected, i tuck mine into the net on the underside of the shelf but will be retro fitting MK4 golf retractable strings to solve it.

and that the boot carpet can still be lifted if needed too

long story short, offer the sizes, carpeted, with photo fit instructions and you will rule ebay buddy  :happy2:

should have just said that from the start  :grin:


Thats a great writeup mate alot of information there,

I'll need to see how much the stealth box's are, if i was to do another one,  specific for the sub it would be around the £400 plus vat  built and trimmed as a one off. (could trim it in carpet to match back of seats etc of a vinal that matches all the surrounding plastics.)

I'd like to think getting them moulded would reduce the costs quite a bit but it may not be as tailored to each application as it'd be done as a run of boxes.

The one at the minute allows the shelf to work fine.

Thankyou very much dude for the input it's been very infomative and will allow me to carry on the idea and development on this project.

the finish and fit will be spot on or i'd scrap the lot and the idea before releasing it to other people.

Offline VC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 80
  • -Receive: 93
  • Posts: 4359
    • Very Cherry Stickers and Decals
Re: If i was to get these moulded
« Reply #14 on: June 27, 2009, 01:04:17 am »
with the work ive seen so far you'll have no worries with the quality control  :happy2:

a definate gap in the market, i talked to the guy that did mine about churning a few out and he shy'd away from the task as its quite an undertaking and he doesnt do audio for a living only as a hobby so simply not practical

hopefully i didnt come across as slating stealthbox, wasnt my intention, merely to point out the competitor you'd face, but imho looking at what youve done and what they offer i would chose one of yours if the fitment was proved  :happy2:

not that i need one now  :P bloody typical  :grin: