Make a donation

Author Topic: vinyl wrapping  (Read 670 times)

Offline nathangallo

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 24
  • -Receive: 4
  • Posts: 509
    • Email
vinyl wrapping
« on: April 16, 2012, 10:52:21 pm »
Recently i tried repairing the crack on my engine cover insert, but was cracked to much and after spraying it you can still see it and is really annoying me.

So was thinking of maybe wrapping it and if anyone has done it maybe give me some advice on trying to get the letter to stand out also, if it isnt possible then i will just cover it over. as i am getting annoyed with the crack

thanks

Offline Johnny_tro

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 12
  • Posts: 1534
Re: vinyl wrapping
« Reply #1 on: April 16, 2012, 10:53:57 pm »
wouldn't the heat just make it bubble?
'VANDALISED' MK5 GT :( - RNS510 H, Bluetooth Armrest, MDI, 50gb hard drive, I can't park  sensors, Cruise Control, Highline Display, MFSW, Heated Seats, Remote Aux Heating System (Heats and Vents) Winter Pack, Heated & Folding Mirrors, Puddle Lights, Xenons, Headlamp Washers, Heated Washers, Auto lights and wipers, LED's, GTI brakes,, black R32 roof lining, Scirocco Rear View, Rear Footwell Lights

Offline nathangallo

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 24
  • -Receive: 4
  • Posts: 509
    • Email
Re: vinyl wrapping
« Reply #2 on: April 16, 2012, 10:57:04 pm »
wouldn't the heat just make it bubble?


it says it high temperature resistant so i assumed that would be ok?

Offline Luka

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 32
  • Posts: 388
Re: vinyl wrapping
« Reply #3 on: April 16, 2012, 11:05:36 pm »
Have you tried prepping and curing the crack? Drill a hole at the end of it to stop it spreading, fuse together with soldering iron or similar (both sides), body filler then sand. Should be completely unnoticeable with a bit of work. :happy2:
Sold - 2006 Tornado Red GTI 3dr