Author Topic: Torquing Fuel Bump Bolts? (Read 933 times)

George · « **on:** April 20, 2012, 07:39:55 pm »

Hi all,

I'm going to change my cam follower tomorrow but noticed the T30 Torx bolts that hold the pump to the head need to be torque'd to 10nm, and it has to be done carefully due to the threads being in the head. Am I safe to do this with a 1/2" Torque Wrench, if I hold it near the head? Or do I need a 1/4" drive torque wrench?

Thanks

George