Author Topic: carbon wrap dash? (Read 1399 times)

hoggj · « **on:** April 21, 2012, 12:33:39 pm »

Was looking for some help on how to wrap my dash in 3m carbon?, i have taken it apart and all i managed to do was burst most of the clips and my air vent on drivers side :( ,anyone got some advice on how to do this or pics on how to take it all apart ??

Jonny54 · « **Reply #1 on:** April 30, 2012, 09:16:48 pm »

I have just finished doing this to my car mate. What i did was watch loads of you tube how to's then just cracked on with it. The beauty of it is you learn on the way!

I would deffinatly recomend sanding off the loose peeling rubbery crap though. I sanded it back to raw plastic but thats just me. And indstead of a heat gun i used a hair dryer and it worked fine! Will try and get some pics up for you

spankydan · « **Reply #2 on:** May 07, 2012, 05:21:53 pm »

Why wrap it?

Get it out and get it dipped (if possible)?

http://www.visionfinishing.co.uk/

hoggj · « **Reply #3 on:** May 08, 2012, 03:45:03 am »

That's one of the problems I can't get it apart from the air vents to remove it from the dash :(

MC71 · « **Reply #4 on:** May 08, 2012, 11:20:43 pm »

Try this link mate. Might not be "exactly" what your after but I hope it helps. Used this when removing my stereo. Would also highly recommend using trim tools for such jobs, can be bought from eBay for no more than £5 for a pack of 4 assorted sizes.
Good luck!!

http://m.youtube.com/?reload=3&rdm=m3hp7t4d3#/watch?desktop_uri=%2Fwatch%3Fv%3DHNPkS_lQOvA&v=HNPkS_lQOvA&gl=GB

Author Topic: carbon wrap dash? (Read 1399 times)

hoggj

carbon wrap dash?

Jonny54

Re: carbon wrap dash?

spankydan

Re: carbon wrap dash?

hoggj

Re: carbon wrap dash?

MC71

Re: carbon wrap dash?