Make a donation

Author Topic: Removing scratches from gloss black plastic  (Read 1384 times)

Offline tuglet

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 0
  • Posts: 51
    • Email
Removing scratches from gloss black plastic
« on: April 21, 2012, 10:40:32 pm »
Hi

I've got some scratches on the gloss black part of my front bumper, just above the number plate. I have some Meguiars ScratchX that I use on the bodywork with some success. Can I use this on the black gloss bumper too?

Cheers
tuglet

Offline tuglet

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 0
  • Posts: 51
    • Email
Re: Removing scratches from gloss black plastic
« Reply #1 on: April 24, 2012, 04:46:22 pm »
Bump. Any advice?



Offline Luka

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 32
  • Posts: 388
Re: Removing scratches from gloss black plastic
« Reply #2 on: April 24, 2012, 07:30:30 pm »
The megs stuff might be a bit too coarse mate. Have you tried something like LimePrime? If the scratches are quite bad then you do want to work through from a coarse to fine paste. A polisher will be of great use, if not then good old elbow grease. Ideally, protect very well once polished with a good wax.

HTH.
Sold - 2006 Tornado Red GTI 3dr

Offline david proctor

  • Taking part
  • ***
  • Thank You
  • -Given: 3
  • -Receive: 7
  • Posts: 40
Re: Removing scratches from gloss black plastic
« Reply #3 on: April 25, 2012, 09:32:05 pm »
Does the plastic in question have a smooth or textured finish.

Offline Luka

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 32
  • Posts: 388
Re: Removing scratches from gloss black plastic
« Reply #4 on: April 26, 2012, 09:20:55 pm »
Sure he said it was the gloss black sections, found on the front bumper and pillars.  :happy2:
Sold - 2006 Tornado Red GTI 3dr

Offline tuglet

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 0
  • Posts: 51
    • Email
Re: Removing scratches from gloss black plastic
« Reply #5 on: April 28, 2012, 07:39:24 pm »
Sure he said it was the gloss black sections, found on the front bumper and pillars.  :happy2:
Yep, that's the bit. Smooth as a baby's proverbial.