All Things Mk5 > APR Zone

The Official APR v3.1 Results Thread

(1/3) > >>

Keith@APR:
Hello Everyone,

There has been quite a bit of a stir going on as of late regarding APR's v3.1 ECU Recalibration for factory equipped Ko4 turbocharger engines.

APR has recently released v3.1 for all ED30/Pirelli Edition's, SLC R's, Golf R's, Scirocco R's, TT-S' and S3's developed, tested and approved for the UK market.

APR UK's Golf R was the primary development car so we will start with the results of it thus far.

2010 VW Golf R DSG Stage 2+

APR v3.1 ECU Recalibration
APR High Pressure Fuel Pump
VWR Induction System
VWR Turboback Exhaust
VWR Anti-roll Bars
VWR Lower Engine Mount
VWR Coilover Suspension
VWR Braking System
Haldex Performance Controller

Our first timed testing event was a few weeks ago at Santa Pod Raceway with yours truly behind the wheel:



Some of you may have seen Jonny's thread here http://www.vagoc.co.uk/vb/showthread.php?t=10722&showall=1 and as we had planned to run the Golf R at the MLR 30-130mph day we ended up at Bruntingthorpe instead.



With Jonny behind the wheel and some help with the launches from a wet surface we were able to achieve the following:





As we finish up our dyno installation project at our office in Milton Keynes, we will release Official Power Figures for v3.1 but here are some unofficial results in the meantime:

SEAT Leon Cupra R Stage 2+ APR v3.1 APR HPFP in Denmark:



Please feel free to update this thread with any other performance measurements you may have achieved with APR's v3.1.  Eventually I will build a database in this thread to document all of the various dyno graphs, 0-60 times, 1/4 mile times, etc.

Janner_Sy:
You just need to post the timing slip in this thread http://www.mk5golfgti.co.uk/forum/index.php/topic,9244.msg512493.html#new then you'll be added to the 1/4 mile leaderboard

Tfsi_Mike:

Leon Cupra APR St2+ V3.1

APR HPFP
APR Cooler
APR V3.1 St2+ map

ITG Maxogen (Heat reflective wrapped)
RS4 FPRV
NGK Irridium (Cant remember if 7's or 8's are currently in)
BCS 3" Decat TBE (Downpipe heat wrapped)
Neuspeed turbo discharge pipe
Air con pump & condensor removed

Keith@APR:

--- Quote from: Janner_Sy on April 24, 2012, 05:36:50 pm ---You just need to post the timing slip in this thread http://www.mk5golfgti.co.uk/forum/index.php/topic,9244.msg512493.html#new then you'll be added to the 1/4 mile leaderboard

--- End quote ---

Done!  Thank you.

AndrewJB:
Just thought i would add my results to this

Leon Cupra R, APR St1+ V3.1

APR HPFP
Neuspeed P-FLO
THS FR3 Engine Mounts
Uprated Plugs (Cant remember the spec)


Dyno Graph (APR Motorsport UK's Maha Dyno in MK)

Navigation

[0] Message Index

[#] Next page