General > Pro Detailers Work

▀▄ Miglior Detailing: Stunning Porsche TECHART Turbo! Introducing CQuartz FINEST

(1/6) > >>

JPC:



Please take the time to view our full website!!
Detailing In Lancashire Manchester & North West - Miglior Detailing!
If you want to see daily update and photos, please follow us! Links are below!!





Porsche 911 TECHART Turbo - Cobalt Blue

Hi Guys, thanks for reading another write up of mine. This time it's quite a rare 997 turbo.

This car was booked in for:
- Full Correction Detail
- Full wheel refurbishment
- Leather Detail
- CQuartz Finest Protection

Here is the car on arrival.







Outside for a wash and decontamination



Back inside for a claying session and drying off



Bit of a better idea of how the paint was. It's an absolutely stunning colour, but very dull and lifeless due to the swirls on the clear coat.









So, in at the deep end! Lets get correcting!

JPC:
Moving onto an area of the bonnet that was really bad. There is a very deep mark, which looks as if someone else has tried (and failed to remove it). All they achieved is swirling the paint further

See below



This was after



You can see there is a tiny bit of the original deep mark left. This could have been removed but I decided I had removed enough lacquer. I had a hard job just to get that shot above of the mark. So I was happy with that! It's not all about removing heaps of clear coat willy-nilly! It's got to be done in a safe manner with the future in mind also.

Porsche badge removed to polish the bonnet properly





More correction shots…













Before



After













There was a spot on the driver's door, which had been painted so treading carefully here

JPC:























The owner wanted to get rid of the orange halogen bulbs as sidelights so these were replaced with LED CREE bulbs with inbuilt resistors so no dash errors are thrown up!



Onto the arches!











Back onto the correction side of things!

JPC:
More Arch work!







Once all the correction work was done, it was very dusty so the car was taken outside for a thorough rinse down



Now the car by now had had a 3-stage correction but there was still a final polishing stage to complete. I wanted the car to be as glossy as possible, and its well worth the time doing multiple finishing polishes.



Once this was complete it was time to strip the paint of any oils using CarPro eraser





Now time for the coating!

















Refitting the Porsche badge

JPC:
Plastics under the bonnet being dressed





Engine bay dressing



Seals



CarPro Eraser on the wheels before CQuartz Finest







Exhausts





Sealing the glass







As well as all the steps outlined, the leather was cleaned and sealed. There were other stages that weren't photographed due to time constraints too.

Enjoy the after shots!

Navigation

[0] Message Index

[#] Next page