Who has a forge spacer on?

[james]

lol i have not look at it,  it was just on there when i got the car back,  i dont really hear it to be fair.

[PDT]

I have back to back dyno graphs before and after a spacer, will post.

[TrickGTI]

Waste of time and money IMO. Just buy a intake system and with that comes the noise most people are after and proven bhp gains, no loss of power. It may cost more but your getting bhp increase the noise that your after and some eye candy when under the bonnet! 

[Marshall]

I have back to back dyno graphs before and after a spacer, will post.

I for one would be very interested to see these

[Tfsi_Mike]

No benefit for me

  look forward to the b2b dyno

[Marshall]

I had a spacer on my FR which sounded loud and nice for a time.
Anyway I fitted one to my cupra and it was so quiet I removed it again.
Has anyone used the Forge valve with built in spacer? The vac operated one.

Oh Mike no switching available on stage 2 either!! 

[Sammy]

Waste of time and money IMO. Just buy a intake system and with that comes the noise most people are after and proven bhp gains, no loss of power. It may cost more but your getting bhp increase the noise that your after and some eye candy when under the bonnet! 

Very interested to see the graphs too, trick gti are you k03 or k04? Reason I am asking I'd because I have a k03 with intake also but do not get any sounds other then the sound you get in acceleration, mine is DSG btw

[Hedge]

I was given one.  Fitted it and took it off a little after because it sounds GAY.

I'm surprised you didn't fit a second one. 

[Janner_Sy]

I was given one.  Fitted it and took it off a little after because it sounds GAY.

I'm surprised you didn't fit a second one. 

I chose to change cars. Much more effective

[nezquick]

X2..

I did wonder what you meant by sticking open.. its basically a middle piece with three holes that the air rushes out to create the phhhhh noise..


At the end of the day all personal opinions - i enjoyed the novelty and now.moving on - plus i have a intake now :)

[Marshall]

Any comparisons available yet anyone?
Ive got the forge valve for mine which sounds quite nice and works well.
I've removed it as its going into Seat tomorrow for service.
Left my Dblias intake on though.

[Sammy]

@PDT any graphs yet?

[Phaze81]

If your diverter valve is getting stuck  (or you believe it is ) , you can buy uprated springs from Forge to replace with the one inside your OEM diverter valve  (piston type). These are available in four strengths depending on your boost requirements and are represented by colour. 

[Sessions]

Good for making people jump in carparks.