JKM Dyno-Day - Saturday 27th October....

[Sunglasses Ron]

How did Daves (Muckipups) K04 converted vRS TSI perform

353.7 bhp from memory. Impressive

James did 378bhp with a hefty 420 lb ft of torque

What setup is James running?

R-Tech custom map, K04 with WMI. should see the graph   it's totally flat from something like 4200rpm. Holds the power all the way through. Well done Nick for mapping that output  

JKM had to put extra straps on as it was almost pulling itself out of the dyno  

Is this James'?



Either way, impressive stuff for JKM's rollers.. Check the torque out... 

There rollers must of been feeling generous today, as I thought Stage 1 KO4's didn't make 300bhp??  

[RENNTAG]

Great day thanks to Robin and JKM.

Was a bit disapointed with my results, seems i have a fueling issue of some sorts.  

At least i know know though so can get it sorted  

[chungster]

Ben..,

A few didn't!! 

[h4rdy]

Robin that's very similar to my stage 1 ed30 graph, except I loose out a bit of low end and you loose out top end.

....I guess that's the K03 vs K04 difference.

I drove h4rdy's Ed30 today (Stage 2?) - Very nice indeed! The power creeps up on you... I thought the alert beep was telling my I was exceeding 70 but it was 100!! Ooops!

322.2bhp.

Stage 2+ Robin.

310ftlb Torque if I am reading it right. (i'll post to my thread)

Apparently a nice AFR curve?

But the curve is very nice. Full power at 6400rpm and then just holds until the redline.

Very very pleased as it just drives so well

Sorry I couldn't hang around much past 11 chaps but thanks Robin for organising, great bunch of chaps and the badge was briliant Robin/Hedge!

[Saintsteve]

How did Daves (Muckipups) K04 converted vRS TSI perform

353.7 bhp from memory. Impressive

James did 378bhp with a hefty 420 lb ft of torque

What setup is James running?

R-Tech custom map, K04 with WMI. should see the graph   it's totally flat from something like 4200rpm. Holds the power all the way through. Well done Nick for mapping that output  

JKM had to put extra straps on as it was almost pulling itself out of the dyno  

Is this James'?



Either way, impressive stuff for JKM..

There rollers must of been feeling generous today, as I thought Stage 1 KO4's didn't make 300bhp??  

Was a day of low figures... Interesting some Revo cars didn't make as good figures on their new revised remaps..

Was a very big turn out with at least 40 cars on show.

Great to see everyone again... Roll on 2013

[Sunglasses Ron]

Ben..,

A few didn't!! 

Close but no cigar eh mate? 

[Sunglasses Ron]

.
Thanks to everyone for coming - A great day out  

I'm very happy with mine - It's back up to where it was now that the APR hpfp has settled in. The crisp temperature of the day will have helped.

My Revo 2 is still set B7 / F7 / T5.

Cracking results for yours Robin..   Just like you, it seems to be getting better with age..  

[GrayMK5GTI]

How did Daves (Muckipups) K04 converted vRS TSI perform

353.7 bhp from memory. Impressive

James did 378bhp with a hefty 420 lb ft of torque

What setup is James running?

R-Tech custom map, K04 with WMI. should see the graph   it's totally flat from something like 4200rpm. Holds the power all the way through. Well done Nick for mapping that output  

JKM had to put extra straps on as it was almost pulling itself out of the dyno  

Is this James'?



Either way, impressive stuff for JKM's rollers.. Check the torque out... 

There rollers must of been feeling generous today, as I thought Stage 1 KO4's didn't make 300bhp??  

The (almost) stock K03 made 199bhp and the stock ED30 made 229bhp IIRC so seems to be reading about right 

James actually made 450 torques 

[chungster]

Ben..,

A few didn't!! 

Close but no cigar eh mate? 

Will go AmD or Superchips next time 

[Sunglasses Ron]

Ben..,

A few didn't!! 

Close but no cigar eh mate? 

Will go AmD or Superchips next time 

Best mod you'll ever do to a car.. Instant 30bhp.. 

[Wild Bean]

Nice to meet some new peeps today,  I'm still consoling Lee lol
Hedge was up to his school boy pranks, and tried to impress me with his bespoke range of condoms, always thought he was weird !

[flashp]

It was good to meet a few of you today, some really impressive cars on show...a credit to their owners!  I had the silver 3 door Pirelli.
I wasn't sure what mine would make being a Pirelli with a Revo Stg 1, but I got 265.1HP. I've included my plots. Not sure what the AFR plot is telling me as there seems to be a steady decline from 4000rpm. Anyone know anything about these?

I'd love to get nearer 300HP next time...

[chungster]

The AFR lines go down at top of rev range as it gets richer (more fuel ) which is the norm to prevent engine getting too hot and going bang!

But 265 is abit low though for stage 1 Pirelli.

[RedRobin]

Cracking results for yours Robin..  Just like you, it seems to be getting better with age.. 

....Thanks, Ben 

With the handling mods and brakes I've got she's a very sweet drive.

[GrayMK5GTI]

The AFR lines go down at top of rev range as it gets richer (more fuel ) which is the norm to prevent engine getting too hot and going bang!

But 265 is abit low though for stage 1 Pirelli.

Just to add to what chungster said, it may be worth getting a Revo dealer (ie JKM etc) to check your settings. Who installed the map for you?