Right, so had a very productive weekend. Went down to Robins on Saturday morning and got stuck in. the plan for the day was to service the car, fix an electrical fault, get the coilovers in, get the THS engine mounts in and do a trial fit of the Speedlines. Thankfully all went well with no real hiccups worth mentioning!
Coils in :
Mounts :
Cow-sucker-inner cleaned up and re-oiled :
Adapters :
And the trial fit :
Adapters went straight on, nice tight fit on the drive splines as well as the wheel and hub centre bores. Luckily enough 18.5mm is pretty much spot on for the adpater too, so i'm in the very unexpected position where I don't really have to revise the adapter at all, barring speccing a different thickness for the rears. Was well pleased with how they looked on the car as well, I was struggling to properly picture them in my head, but it's all a bit more real now that i've seen them on.
Went for a healthy burn then afterwards to try out the new coils. We set them around the middle damping setting, and I was very, very immpressed by them. The comfort was excellent, and even on a very wet night like Saturday night, the car felt really sure footed. They were a clear step above the XYZs in pretty much every respect, particularly comfort.
The engine mounts were a little underwhelming in their effect, it was only when i was really thrashing that they became noticeable - there's a lot less drama between gears at high RPM, the car doesn't hunt as much and leaves going up through the gears a lot less jerky. Putting the foot down at low RPM in a low gear was also a lot smoother, and i noticed a fair reduction in wheel spin/engine hop when boost kicked in (Yo). The expected extra vibration at idle was pretty minimal too.
So all in all a pretty good day! Have a package on the way at the minute too that i'll update the thread with when it lands.