Make a donation

Author Topic: Low pressure "in-tank" uprated fuel pump internals  (Read 1245 times)

Offline scopes

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 131
  • -Receive: 115
  • Posts: 2283
  • Wolfsburg Edition
    • My GTI
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,49748.0.html
Low pressure "in-tank" uprated fuel pump internals
« on: May 01, 2012, 10:31:57 am »
I was reading this would be 1 of the mods to go for on the 2.0 TFSI, i think it was Hurdy said thats one of the mods that he would do, going back to 2.0lt

Low pressure "in-tank" uprated fuel pump internals

Whats the one to go for, and where to get it?

Thanks  :happy2:
If it's not broke, Mod it.....



Silver is the way !

Offline berg

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 38
  • Posts: 1681
Re: Low pressure "in-tank" uprated fuel pump internals
« Reply #1 on: May 01, 2012, 12:42:32 pm »
I saw this too on one of John's comments and would like further info as not sure what exactly is required and what benefit is provided... :confused:
Diamond Black Pearl Edition 30, still going strong but now back to Stg 1

Offline Tfsi_Mike

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 241
  • -Receive: 309
  • Posts: 10222
  • Go Large or Go Home
    • Tfsi Mikes Money Pit AKS / TTE / RTech St2+ Cupra
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,32721.msg402587.html#msg402587
Re: Low pressure "in-tank" uprated fuel pump internals
« Reply #2 on: May 01, 2012, 01:13:51 pm »

DanGB & possibly SteveP have upgraded LPFP.  USP ones i believe. 

Offline muckipup

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 25
  • Posts: 419
Re: Low pressure "in-tank" uprated fuel pump internals
« Reply #3 on: May 01, 2012, 01:41:11 pm »
Is it really about the LPFP internals or more about swapping the whole OEM pump for something that gives a bit more oomph?

I considered this myself but that was only because I had AFR issues even after fitting an uprated HPFP. It turned out that it was not the LPFP in my case and am therefore wondering what the point to this would be.