Make a donation

Author Topic: K&N Intake  (Read 2952 times)

Offline gigolo456

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 1
  • -Receive: 15
  • Posts: 746
Re: K&N Intake
« Reply #15 on: May 02, 2012, 11:06:16 am »
Goo retort, very honest! Ref my intercoolers, they're just stock and i was under the assumption they wouldn't need to be changed unless i was upgrading from Stage 1 remap to Stage 2 (+)!?

Offline 56OctyVRS

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 39
  • -Receive: 72
  • Posts: 1003
Re: K&N Intake
« Reply #16 on: May 02, 2012, 11:26:21 am »
Having had one and sold it to Webby I can vouch for the quality and performance. I made 252 bhp on Sharks rollers with a mis firing plug so it didnt make full boost.  The only reason for selling was the noise so I refitted the OE engine cover and am now after either a VWR or APR intake.  But if you like the noise they are excellent filters for the money.  Each company will market their air filter as the best, but they are all just filters on the end of a tube!  The K&N was also maf scaled friendly so a bargain for the price.
« Last Edit: May 09, 2012, 04:32:59 pm by 56OctyVRS »
Frozen White Ford Focus 1.6 Ecoboost Titanium.
Mods so far - Superchips Bluefin, High Flow Air Box

Offline gigolo456

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 1
  • -Receive: 15
  • Posts: 746
Re: K&N Intake
« Reply #17 on: May 02, 2012, 11:29:27 am »
Am i missing something here, aren't filters (panel) something very different from an intake? I currently have stock intake, but Pipercross panel filter... :confused:

Andrew

Offline 56OctyVRS

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 39
  • -Receive: 72
  • Posts: 1003
Re: K&N Intake
« Reply #18 on: May 02, 2012, 11:48:36 am »
Yes the panel filters just fit into the OE air box where as the intakes do away with the factory air box. I have a K&N panel filter fitted and it works fine for a road car and fast road driving.
Frozen White Ford Focus 1.6 Ecoboost Titanium.
Mods so far - Superchips Bluefin, High Flow Air Box

Offline gigolo456

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 1
  • -Receive: 15
  • Posts: 746
Re: K&N Intake
« Reply #19 on: May 02, 2012, 12:02:04 pm »
Decisions decisions, do i stick with panel filter or upgrade the intake!!!???  :confused:

Offline nezquick

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 7
  • -Receive: 33
  • Posts: 789
Re: K&N Intake
« Reply #20 on: May 02, 2012, 12:18:51 pm »
To be brutally honest mate - either have their own benifits and disadvantages.

a panel filter if upgraded will suit you fine at stage one - I believe mk5gtian can shed some light on figures - and good if you want to keep everything looking oem

a intake at the right price can be a worthwhile mod - if your not into spending large sums of money for intakes then its probably not the route to take, or your best of waiting until a bargain comes up.

Intakes make noise but only when your heavy on the throttle, some will make more noise than others on full throttle and driving around. The typhoon kit (and im not going to say its the best or the worse as already mentioned each brand will claim they'res makes more bhp on the rollers and has better quality etc etc) makes next to no noise on easy or gentle driving but put your foot down and like all other intakes you get a lovely nice shhuuuhhhhhhh and you can really hear the air being sucked it.

Like mentioned - at the end of the day its just a filter on the end of a stick - granted as im sure someone will say "oh yeah but its not just..." there are some science to making a quality intake such as the degree in the bends, how many bends, inch diameter of pipe, filtration level of filter etc etc yadda yadda but truthfully there isn't any real defining this is a better intake because it does xyz and is built from xyz with intakes - I suppose some people pay for a brand and others pay for a intake and then spend more money elsewhere which is fine and don't get me wrong some of the more expensive intakes like ITG are very very good at what they do - I personally would love one if they were a little cheaper - but then if you really wanted to you could just buy a intake tube and then a ITG filter seperate and put the two together.


with refer to your intercooler - stock is fine for stage 1 and even 2 but what I was trying to get at is that the air cooling or mainly done by your intercooler so the efficiently of a uprated intercooler out weighs that of a intake. although every little helps!

Offline Bncy Wäbit

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 16
    • Email
Re: K&N Intake
« Reply #21 on: May 09, 2012, 02:22:11 pm »
Did anyone fit the k& on an edition 30? And what mod did u do to it?
Or is it plug and play with something like the vwr k04 adaptor?

Offline sub39h

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 189
  • -Receive: 84
  • Posts: 1719
Re: K&N Intake
« Reply #22 on: May 09, 2012, 06:53:10 pm »
at that price you have many better intakes

ITG Maxogen, VWR Intake, Forge Twintake, BSH, Evoms to name a few

do NOT buy a BSH. they're utter garbage
2006 Phantom Black A3 2.0T S-Line
DSG | Rear Parking Sensors | MFSW | BOSE | Auto lights/wipers | Half leather
MODS : '09 tail lights | TT vents | Bilstein B14 | RNS-E 2010 | AMI | AKS Tuning custom CAI | Titanium BBS VZs | NQS BBK | WALK | Autotech RARB | Bluemotion aero | Blueflame TBE | Autotech HPFP | MY11 Wing Mirrors | Bluetooth | S3 Intercooler
PLANS: Stage 2+