Make a donation

Author Topic: Fitting MDI Kit in tandem with Bluetooth kit?? **solved**  (Read 2825 times)

Offline jason_rmh

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 69
  • -Receive: 81
  • Posts: 911
Fitting MDI Kit in tandem with Bluetooth kit?? **solved**
« on: May 13, 2012, 07:05:27 am »
I have fitted a 5n0 bluetooth kit and also want to fit the MDI kit.
I have the kufatec MDI fitting loom and a plug and play bluetooth loom.

What confuses me is that the kufatec kit appears to have a blanking plug on the quad lock connector and doesnt have the pins to connect to the rest of the loom.

Quadlock from car and Bluetooth kit looks like this:


Quadlock from Kufatec MDI kit looks like this:


Which order should these looms be connected?
Is there a way to remove the blue blanking plug? WOuld it make a difference if I did?
(You can see where I have tried to pull the blue blanking plug out)

eg.
HEAD UNIT -- >  MDI LOOM -- > BLUETOOTH LOOM -- > CAR LOOM

Thanks
Jason
« Last Edit: May 13, 2012, 07:09:35 am by jason_rmh »

VCDS (Preston, Lancashire)

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Fitting MDI Kit in tandem with Bluetooth kit??
« Reply #1 on: May 13, 2012, 11:03:49 pm »
The order doesn't matter.  CAN is a data bus so it'll have multiple (Multiplexed) signals on one cable.

Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: Fitting MDI Kit in tandem with Bluetooth kit??
« Reply #2 on: May 14, 2012, 05:31:57 am »
Although it doesn't matter, just make sure the loom that plugs into the stereo has the wires to for the other loom.

some MDI looms I have seen haven't had the wires for the Telephone
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline jason_rmh

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 69
  • -Receive: 81
  • Posts: 911
Re: Re: Re: Fitting MDI Kit in tandem with Bluetooth kit??
« Reply #3 on: May 14, 2012, 06:29:28 am »
Although it doesn't matter, just make sure the loom that plugs into the stereo has the wires to for the other loom.

some MDI looms I have seen haven't had the wires for the Telephone

That's what prompted my question. The blanking plate will not allow the  connections. The wires are there tho.
Will have a better look later and report back.

VCDS (Preston, Lancashire)

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Fitting MDI Kit in tandem with Bluetooth kit??
« Reply #4 on: May 14, 2012, 08:59:22 am »
I'm afraid it's a bit of a problem with these Plug and Play looms that seem to be popular now.  They aren't always fully populated.
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline CocoPops

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 11
  • Posts: 596
    • Kennet Heath
    • Email
Re: Fitting MDI Kit in tandem with Bluetooth kit??
« Reply #5 on: May 14, 2012, 12:42:39 pm »
I have Car + Bluetooth > MDI loom > Blaupunkt PnP loom > RNS510

Works fine here.
Used to Own: 2008 GTI Ed30 | ITG Intake | Miltek TBE System | Bluefin Stage 2 | 327bhp
On Order: 2017 Golf GTI Performance Pack 5dr DSG
Also own: 2016 Lotus Evora 400

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Fitting MDI Kit in tandem with Bluetooth kit??
« Reply #6 on: May 14, 2012, 12:43:46 pm »
I have Car + Bluetooth > MDI loom > Blaupunkt PnP loom > RNS510

Oh and don't I know it!!  :signLOL:
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline CocoPops

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 11
  • Posts: 596
    • Kennet Heath
    • Email
Re: Fitting MDI Kit in tandem with Bluetooth kit??
« Reply #7 on: May 14, 2012, 12:45:11 pm »
Yes, as Stu knows, it was a pain in the arse to stuff all the looms back behind the 510! :happy2:
Used to Own: 2008 GTI Ed30 | ITG Intake | Miltek TBE System | Bluefin Stage 2 | 327bhp
On Order: 2017 Golf GTI Performance Pack 5dr DSG
Also own: 2016 Lotus Evora 400

Offline DamoP

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 115
  • Posts: 2452
  • 2007 Edition 30 number 1242
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,86073.0.html
Re: Fitting MDI Kit in tandem with Bluetooth kit??
« Reply #8 on: May 23, 2012, 06:56:48 pm »
you need an MDI compatible bluetooth loom , this is one i have fitted to a few cars
http://www.kufatec.co.uk/shop/product_info.php/info/p920_c26_Bluetooth-Handsfree---Harness----Bluetooth-Only---VW-Golf-5.html
MDI Armrest & Glovebox kits
MDI looms , iPod, USB & lightening Iphone 5 leads
Armrests, cloth and leather
Retro fit Armrest 6 CD changer/Ipod dock kits

Offline jason_rmh

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 69
  • -Receive: 81
  • Posts: 911
Re: Re: Fitting MDI Kit in tandem with Bluetooth kit??
« Reply #9 on: May 23, 2012, 08:54:03 pm »
I bought the mdi kufatec loom. Turns out the blue thing isn't a blanking plug.
Its all fitted and working now :P

VCDS (Preston, Lancashire)