Make a donation

Author Topic: CV Boot  (Read 1170 times)

Offline Johnny_tro

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 12
  • Posts: 1534
CV Boot
« on: May 13, 2012, 12:43:31 pm »
The out cover has small tare in mine - do you have to remove the drive shaft out the centre of the hub to replace this?

or is it simple job?
'VANDALISED' MK5 GT :( - RNS510 H, Bluetooth Armrest, MDI, 50gb hard drive, I can't park  sensors, Cruise Control, Highline Display, MFSW, Heated Seats, Remote Aux Heating System (Heats and Vents) Winter Pack, Heated & Folding Mirrors, Puddle Lights, Xenons, Headlamp Washers, Heated Washers, Auto lights and wipers, LED's, GTI brakes,, black R32 roof lining, Scirocco Rear View, Rear Footwell Lights

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: CV Boot
« Reply #1 on: May 13, 2012, 01:07:19 pm »
I always find it easier and quicker to remove the whole shaft.

Quite and easy fit.  Make sure you go for a genuine boot kit as they are much higher quality.
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline ianv5

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 12
  • Posts: 437
Re: CV Boot
« Reply #2 on: May 13, 2012, 02:33:59 pm »
I always find it easier and quicker to remove the whole shaft.

Quite and easy fit.  Make sure you go for a genuine boot kit as they are much higher quality.

Is it a diy job? Mine needs doing, what tools will I need?