Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: RNS 510 firmware update  (Read 1499 times)

andy404

  • Guest
RNS 510 firmware update
« on: May 14, 2012, 01:58:02 pm »
Hi all,

I have been trying to update the firmware on my RNS510 and have a bit of a problem, it seems no matter which firmware version I use, the process always fails at the same point, which is at 12% of the GATEWAY update, I then get the message: SWL ERROR, Error-VuC- Labrary load failure. I have managed to recover the unit using the SWL Recovery disc but wondered if anyone has any ideas why this might be happening?. I think the unit is version a B and was running firware 1100. Any help would be greatly appreciated. Thanks.
« Last Edit: May 14, 2012, 02:31:46 pm by andy404 »
Logged

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: RNS 510 firmware update
« Reply #1 on: May 14, 2012, 06:07:07 pm »
Do you have an MDI or anything else wired in with a Plug & Play lead?
Logged
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline vRS Carl

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 282
  • -Receive: 240
  • Posts: 3088
  • I'm the F.A.G (Forum Apple Guru)
Re: RNS 510 firmware update
« Reply #2 on: May 14, 2012, 06:08:46 pm »
What Firmware are you trying to upgrade to?

If it is anything past 2680 forget it. You can't make that big a jump. You will have to find 2680 first, upgrade to that and then go to whatever one your trying to upload.

That's normally what causes that problem.
Logged
Pages: [1]   Go Up
« previous next »