Hello, people!
This is my first post here, and it is not a happy one.
As some of you may know I have my E30 remapped by Oettinger to 305hp/410Nm. It is just the map, no mechanical mods.
Two weeks ago I crashed into a van, and my front was destroyed, and radiator leaked out. A VW service station fixed everything, replacing the bumper, the hood, some parts from the radiator, and whatelse.
After that I tested the car, and obviously the map was deleted.
I went to Oettinger yesterday, and they did a remap again, the boss showed me an automatic email that they get when remap is done, and it read OK. I also asked them to put a sport filter in the original air box, which they have done (it is a non-oiled filter).
The problem is, the car does not feel 305hp strong. It does not have the airliner acceleration from 3000rpm that I felt before the crash. It feels like a 230hp car, despite the OK readout of the map burn.
I asked the boss of Oettinger shop, who did the remap, what should I do.
He told me to go to a VW service and ask them what the problem is. Specifically, he wrote the following:
"...they should check charge and the memory read error.
Perhaps this is also a boost pressure hose not properly mounted. There can be several causes."
So I wonder what I should do now?
Any suggestions what the problem could be?
I mean, if pressure hose is wrongly mounted, should not I be losing pressure even on 230hp car?
Can they measure charge without rolling road? What is memory read error?
I am concerned, don't know what to do. I have enough problems with interior rattling like unoiled cart, and now this...
THanks guys/girls in advance for help!